A multiplayer electronic board game table allowing up to 4 players. It features a low-res pixel display and a rotating die.
Have you ever been tired of your old hardware and wanted to upgrade with all the fixings?
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
The making of a large 3D printer (400x400x400 mm) for a college project.
Use LEGO bricks and Hackeet Low-Code platform to build a voice-activated weather station that respects your privacy.
Sony Spresense Board + NodeMCU + Google Firebase + Android Studio
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
A rotating platform based on a stepper motor 28BYJ48, controlled via the X113647 stepper motor driver by serial dialogue.
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
IKEA PS 2014 Pendant Lamp Modification
A barn door astrophotography mount made with no special tools.
A full featured stepper control involving speed and line interpolation for 2-axis motion.
Use three stepper motors to make the classic analog clock movement in the opposite direction.
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
Our dynamometer tests the performance of stepper motors and their drivers by applying customizable load torque profiles through a GUI.
Connect Stepper Motor to Arduino and control it with Rotary Encoder - Quick and Easy!
This device uses 4 servo-driven wheels to slide forwards, backwards, left, right, and turn. Currently under serial or Bluetooth control.
This is a homemade automatic cat feeder instruction. Simple to use and easy to build, no special tools or materials are needed.
I wanted to create a way to pass salt in the laziest way imaginable using the Infineon TLE493D 3D Magnetic Sensor 2GO.
A nice and fun watering system built from Raspberry Pi Zero and LEGO bricks to nicely take care of your plants.
A Rubik's Cube solver able to resolve the puzzle in less then 10 seconds.
On the web are Cloned Keyes CNC Shields for the Arduino NANO. They are cheep and good value. BUT. The Micro Stepping Jumpers are wrong.