Just a simple, fun Candy Dispenser using Arduino, a 3D Printer, and tape.
A mechanical clock which stretches a flexible elastic to form the digits
In this tutorial we will learn how to move a stepper motor NEMA17 for a certain amount of steps, and then with a push of a button repeat it.
When sensor detects movement the stepper motor activates. Can be reversed by removing the ! in if cycle.
In this tutorial we will learn how to rotate a stepper motor for a certain time period and then with a push of a button repeat it again.
In this tutorial we will learn how to move a stepper motor, change the speed with the potentiometer and change the direction using a button.
In this tutorial we will use stepper driver A4988, NEMA17 stepper motor, Arduino Uno and Visuino to run a stepper motor.
A 3D printed clock driven by a single stepper motor using gears to separate hours, minutes and seconds.
It is an Open Source –DIY- project. It can maintain its own balance and can be controlled remotely via Bluetooth connection.
Automation of a microscope Z-stage by Arduino + stepper 28BYJ48, controlled by serial dialogue, with emulated keypress after each movement.
Arduino project to show how to run three different types of motors: stepper motor, continuous rotation servo and 180 degree position servo.
The goal of this mini-project is to drive a 4-phase bipolar stepper motor using high-level synthesis for FPGA.
An automatic turntable to assist in capturing images of your product from all the directions.
3D printed and run by a single stepper motor, this unique clock's hands float in a hollow frame.
Learn how to achieve smooth operation with precise velocity and position control using the IFX007T and magnetic angle sensor TLE5012B.
Hi friends, we will see how to make a simple and awesome mini CNC plotter machine in this project.
I was able to control the focus adjustment of the telescope mak127 sp by the stepping motor which connected to M5Stack.
In this project, I’ll show you how to build a motorized rotary table for 3D scanning.
PAROL6 is a high-performance 3D-printed desktop robotic arm. Control software, GUI, and robots STL files are open-source
Syringe Drive for Infusion/Withdraw
A dust shoe for CNC routers that clips on and adjusts with a magnet, then locked down with a spring clamp.
Application notes for Pmod STEP and Arduino Uno. In this app, the motor makes a complete turn in one direction and then returns to origin.
In this pro-tip we explore the different features of the TLE94112 multi-half-bridge library by Infineon.
Tired of getting off your couch to unlock your door for your roommate? Forget to lock your door on your way to class? Say no more…
