A cheap DIY alternative to expensive macro rails (for focus stacking macro photography).
Multiple Stepper Motor Control (ULN2003 and 28BYJ-48) 3 Different Controls With 2 Libraries
Let's deep-dive and check out the internals of the ULN2003 IC and how it can be used in our projects.
Arduino learns trigonometry and can now measure the heights of tall objects with just a few clicks!
In this simple tutorial we will learn how to control a 4-wire stepper motor with a joystick using Arduino. Watch the Video!
Fly away in this plane that moves up and down in real-time as the Boeing stock price rises and falls!!
Minimalist NEMA 17 robot wheeled platform using just the Arduino and Ramps 1.4. 1:8 gear ratio using printed pulley and closed GT2 belt
This is a simple program to control the EEZYBOT MK2 robot arm using STM32F4 and Ada.
Drive a 28BYJ-48 stepper motor precisely with an STM32 and ULN2003 driver, using GPIO for coil control and buttons for direction.
In this tutorial we are going to control a stepper motor Nema 17 by using a 3rd Party EDP stepper component in Visuino.
#DonLuc #Robotics #XBee #Electronics #Consultant #Vlog #Aphasia #Microcontrollers #SparkFun #Fritzing #Programming #Adafruit #Arduino
This project respects the norms of social distancing. Thus, the owner can communicate with the safe from any distance Great for this period!
#DonLuc #Electronics #Robotics #Microcontrollers #Consultant #Arduino #RedBoardQwiic #SparkFun #Pololu #Fritzing #Aphasia #Vlog
Robotics, Arduino UNO, Arduino Fio, XBee, Display, EasyDriver, Small Stepper, Etc...
Mechanical split flap displays controlled with the Pocket Beagle.
I needed a way to print a lot small parts (cable chain pieces) fast and preferably in an automated way, so I build this modular delta belt 3
A small and fun project about the orbit of the planets in the solar system. Suitable for beginner seeking fun project related to astronomy.
Watch your step! Because in this Protip we ascend with motor control into the domain of stepper motors.
Did you ever want something too fascinating and then realized it was a bit more than fascinating, i.e. it was super excellent?
I created a DIY controller box using single-axis joystick modules and Arduino Nano to control an RGB LED, servo motor, and stepper motor!
A new episode according to the motto "learn by destruction"
This project HVPAK configured as stepper motor driver with current mode control
An analogue clock without physical hands which uses UVA LED's and Photo Luminescent film.
