Safety controller care about employee health
How many steps does your dog take? Add OLED C and Pedometer 3 clicks to the BeagleBoard. org® PocketBeagle® featuring the OSD3358 SiP
Create a paper football game board and add digital features and automation including scoring, possession, and a jumbotron.
In This Tutorial i'm going to show you how to setup the serial communication between Arduino and NodeMCU for soil moisture monitoring.
This project walks through how to create a hardware design including all board peripherals for the Kria KD240 Drives Kit in Vivado 2023.2
Qtechknow Creator Kit - make an LED blink with the Qduino Mini as your first project!
Motor driven is the key of automation. In this chapter, I try to show how Raspberry Pi control ABB motor Driver by using RS485.
Monitor temperature from LinkIt, communicate it to node.js server over MQTT, then finally log it into a MongoDB database.
Musical eggs that make visual art!
Learn how to implement a code to verify the operation of the DS18B20 temperature sensor and inform in real time through the 16x2 LCD.
We will generate.HEX files using Arduino IDE and then using a very simple method, Flash the Arduino using these.HEX files
How to use the M5Stack Fan Module with the CoreMP135 to help cool it down.
Adding Yocto project on RPI3 and adding NAS Server on RPI3
This project is about a alarm turn on while the distance between two people is smaller than 1.5 meter the minimum recommended for population
Using Sparrow v3 and DeviceHub.net for indoor and outdoor wireless sensor node monitoring
I installed various EE design applications on the Ubuntu 22.04 desktop image of my KV260 including KiCad, and laid out a custom PCB with it.
Save water, save energy and monitor water consumption with a smart faucet.
This is a getting started guide describing how to use the NXP FRDM-K64F dev board within the online mbed IOT development platform.
The Sub-Q Warmer is a subcutaneous fluid warmer for cats with kidney conditions that cannot drink enough water to maintain hydration.
This project describes how to add support for Hailo-8 to the Tria Vitis Platforms.
Qtechknow Creator Kit - make an LED blink when you press a button with the Qduino Mini as your second project!
Learn how to use SDSoC to accelerate functions from the processors to the logic in the Ultra96!
This project demonstrates how to stream samples from the ADC on the Zmod Digitizer into the DDR memory of the Eclypse Z7.
The micro:bit is a small ARM Cortex-M0 board for computer education. In this post I will explain how to start programming it in Ada!
