PYNQ is an open-source project that makes it easy to design embedded systems using Python for FPGA.
Teach ALL kids the fundamentals of AI and machine learning, through games and hardware and software design.
See how to integrate custom RTL modules directly into Vivado block design flow.
The goal: to develop an autonomous UAV system able to detect human activity and gathers data to help reinforce the quarantine zones.
Detect temperature with an Atmel MCU and publish changes to a live-updating chart, visualize with the Project EON framework.
This project walks through how to create a fixed hardware design (fixed platform) for the Zynq-7000 SoC in Vivado 2024.1.
A custom component made with nRF24L01P wireless transceiver with PSoC!
This project walks through how to create an embedded Linux image for the ARM-core in the Zynq-7000 using PetaLinux 2024.1
LCD display connections
An Arduino UNO large clock on a 16x2 LCD display shield with the ability to change hours and minutes.
Bringing Up Heterogeneous RISC-V on Allwinner SoCs (Part 2): Building the Linux `remoteproc` Driver and Hardware Verification Suite
Here's how you can integrate and program Infineon's XMC Microcontroller using the Arduino IDE.
Using the ADP3450, this project measures amount of delay between asserting FPGA IO on base of NPN 2N3094 and LED illuminating on collector.
A compact, feature-rich smart UPS for Raspberry Pi boards.
Know the difference between Petalinux and Baremetal Designs
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Make the smallest Arduino possible with just an ATtiny85 8-pin DIL-IC running in 8MHz from an internal Oscillator.
Developed a sensing system, interfacing an AHT21 sensor and 8-bit parallel 8080 display using custom STM32 drivers.
Learn how to build a temperature gauge thermometer with Arduino, DS18B20 sensor and TM1637 module.
This project walks through the steps of how I designed my own custom carrier board for the AMD Kria™ K24 SOM.
Let's learn to make Arduino gamepad or controller to play games or even automate them
Made a twist on good old Nanoleaf project with WS2812B RGB LEDs and Attiny85!
Want to build your own TinyML application? This is a detailed approach to getting started with TensorFlow Lite for Microcontrollers!
Simple sketch for Uno to generate musical notes on MIDI shield DIN5 OUT connector. Olimex and Sparkfun both supported.
