Teach your See 'n Say to say more than just animal noises!
A quick start guide to program STM32F407 Discovery Board with mbed online IDE.
A low-cost DIY programming adapter.
Use Visual Studio Code across your network to edit files on your Raspberry Pi.
Reconfigurable structures that enhance occupants' social and physical experiences.
Running a simple ANN on a FPGA for MNIST with more than 200'000 fps. Using the Kria KV260 FPGA, HLS and Pynq
Beyond Beeps and MP3 Clips: Real Voice on MCUs.
An STM32 Blue Pill room monitor built with six FreeRTOS tasks, a DHT22, LDR, PIR sensor, rotary encoder, SSD1306 OLED, and PWM buzzer.
This project is a Getting Started Guide to controlling a robot with hand signs that was presented in our Webinar series for ZUBoard.
Getting Started with Safe Haptic Neuroprosthesis using the Haptic Cape for BeagleBone Green
A small, fully featured and cheap wifi module with circuit and PCB designs. let's play with 32 bit microcontrollers.
Struggling to connect your cheap Arduino UNO to a reliable IoT network, meet Tuya, an enterprise-grade IoT development suite.
The powers of PubNub, Leap Motion, and Raspberry Pi collide with this IoT motion controlled servo device!
A little USB key that generates and stores ultra secure passwords.
Come forward to meet the speaking mailbox.
This project demonstrates how to prep the Linux image for the Kria to be able to install Edge Impulse for Linux and connect to EI Studio.
Got few LEDs laying around? Why not use them to make a 4x4x4 LED cube with the help of Arduino?
A TinyML wearable for environmental sensing. Developed with the Edge Impulse platform and powered by the Syntiant TinyML board.
SOFTPWM : DMA+GPIO, not interrupt based, individually controlled, did you ran out of PWM pins?
Control the speed of brushless DC motor using Arduino and Bluetooth module (HC-05).
You'll meet the world's smallest Arduino with 0.45 '' x 0.40 '' (11.5mm x 10.3).
A tutorial by Arduino User Group Gujarat for getting started with the NodeMCU (ESP8266) on Arduino IDE.
We will explore the fantastic world of Physical Computing by programming tiny devices such as the XIAO BLE Sense using CircuitPython!
In this tutorial we are going to setup the Yocto environment, build a basic image and put it on our board.
