Deploy YOLOv8-Pose on NE301, diagnose a silent INT8 output collapse, and restore the four-keypoint pipeline for analog meter reading.
Exploring timer-based ISRs and foreground/background task scheduling on the STM32F407ZGT6 RT-Spark development board.
A simple STM32 project that creates sounds and lets users adjust the pitch using buttons controls.
The project demonstrates how the STM32H743IIK6 platform can combine real-time data acquisition, local storage and network communication...
A raspberry pi pico anb pico 2 based digital IO MCP tool to automate and help debug embedded systems. Now with full Debugger/Programmer
An RT Spark 1 STM32F407XX based, function generator using DMA and DAC to synthesize square, ramp, and sine waves.
A voltage monitor on the STM32F407 reads a potentiometer to change an LED color, and was tested with both polling and interrupts to compare
Simple RT-Spark project that tests reaction time using an RGB LED and built-in button after 1 to 2 seconds.
DIY digital FM stereo radio receiver built around the Arduino Nano / Uno, RDA5807M FM radio chip, and a classic Nokia 5110 LCD.
An open-source, cross-platform Classical CAN analyzer built with Python and the Infineon XMC4700 Relax Kit.
Surveillance system prototyping for sbc platforms or pc
A simple digital clock made using the RT-Spark Development Board with the STM32F407ZGT6 microcontroller.
This project combines timer interrupts, an LCD display, and PWM to create a digital clock with an LED fading effect.
Learn: how LCD I2C works, how to connect LCD I2C to ESP32, how to program ESP32 C3 Super Mini step by step.
An edge AI fitness tracker that detects pose, counts pull-ups, and streams annotated results to any browser without the cloud.
Reference code of running NuttX on dual cores of Pi Pico/Pico2 with ArduProf framework
A beginner-friendly Arduino UNO project that demonstrates LED control using simple C++ code and digital output.
A compact 10 Hz to 20 kHz function generator using only the built-in hardware and 3.5 mm audio output of the M5Stack Cardputer ADV.
Learn how to set up an ESP32 development board, upload your first program, connect to Wi-Fi, and start building IoT projects with this begin
In this project we make an MP3 Player using only RT-Spark and Its built-in audio jack.
Smart Blind Stick using STM32F446RE & FreeRTOS for real-time obstacle detection with ultrasonic sensor, buzzer and LED alerts.
Fast pio interface to put data fast to the ic408hx fpga or read fast from the fpga
An autonomous RC car system that uses computer vision, PID control, and sensor feedback on a Raspberry Pi 5 to follow lanes, maintain speed,
We ran CPU, memory, GPU, and NPU loads together for five hours to validate the reComputer RK3576's cooling, power, and stability.
