Developed an Arduino-based rover with a team, featuring real-time remote control and environmental sensing.
In this blog we will learn how to blink led with various combinations.
A laser shooting game built with M5Stack. Select Real or Practice mode, aim at the target, and count every successful hit in real time.
SWARM-Q uses Arduino UNO Q and AI vision to coordinate multiple autonomous robots for intelligent, collaborative physical tasks.
Real-time drone-view object detection on RK3576 NPU using VisDrone YOLOv8s. Detects 11 classes with RKNN acceleration and web streaming.
Rockchip (EASY EAI) RV1126B Ethernet Communication
A commercial facility manager came to us with a familiar pain point. They had a building with 40+ HVAC units spread across three floors.
This means downloading a sizable compiler toolchain to your computer. Take care to verify your development board does not use another chip.
Dual CO₂ sensors cross-validation, round LCD display, and ThingsBoard cloud dashboard — built solo from hardware to cloud.
This project shows how to blink onboard LEDs on the RT-Spark board using STM32CubeMX and STM32CubeIDE. It uses GPIO output pins and delay.
Transforming digital code into continuous analog signals to build a custom waveform generator.
A simple RT-spark-based voltage monitoring system was developed to measure battery and USB voltages using the ADC.
Learn how to control Advertising on the DA1453x BLE Series Change between Undirected Advertising and Non-connectable advertising via button
Learn how to interface a 5V relay module with Arduino Uno using a simple wiring diagram and beginner-friendly Arduino code. This tutorial ex
Build a DIY wireless air mouse using MPU6050 & ESP32-C3 to control your cursor with hand gestures via Bluetooth LE.
Smart hydration tracker that uses ESP32 and VL53L0X ToF sensor to monitor water consumption and help users stay hydrated throughout the day.
We integrate the AgileX Dual-Arm Nero into Isaac Lab, enabling fast RL training and validation of robust dual-arm manipulation policies.
Build a low-cost smart cooling controller with the STM32F103C8T6 “Blue Pill. ” The MCU reads temperature, drives a 4-wire PWM fan,...
Full hls4ml CNN pipeline on RFSoC 4x2 — every undocumented toolchain bug diagnosed and fixed, including a novel AXI DMA deadlock.
Rebuilding PWM fan control on the Kria KV260 with a custom Ubuntu rootfs, from PL to kernel modules, device tree, and userspace tools
A lightweight personal task manager; your favorite dumb smart device and perfect work companion.
The hardware timer interrupt increments the time count every millisecond, while the LCD displays the time.
Build a PetaLinux 2022.1 image for the Zynq UltraScale+ AUP ZU3 and control an LED from Linux via sysfs GPIO
This is an RC car that performs lane keeping, speed control, and stop detection!
