Demonstrated push-buttons on the RT Spark to light LEDs with corresponding short Christmas-themed tone in the buzzer.
This is a very uncomplicated add-on shield for our LoRa Base Module. It is designed to make connecting sensors easy and neat
Implementing hardware timer interrupts and foreground/background task scheduling on the STM32F407ZGT6 RT-Spark board.
This project shows how to use EK-RA6M5 to communicate with the on-board OSPI flash in SPI mode and Single OPI mode
This guide will introduce you to the fundamental workflow of building and deploying containers with Atym.
Grimwalker turns a $5 esp32 into a living digital pet that survives on wifi packets. feed it probe requests, watch it grow.
Controlling RT-Spark's built-in LCD and 3 LEDs using 5 momentary switches via GPIO on STM32F407ZGT6.
The MC80F0708D-P from ABOV Semiconductor (formerly ABOV/LG Innotek lineage) is a solid drop-in for many legacy 8051 designs—enhanced core
In this Tutorial, we will continue append a hardware design from the last tutorial to include DDR Memory and a Hardware Timer.
Here is adapter from MikroBUS Click board connector for TI made RF modules like CC3000EM and CC2500EM.
An introduction to schematic-as-code
A hands-on STM32 project demonstrating timers, interrupts, latency, and task response analysis.
STM32F446RE control unit: live UART diagnostics, safety state machine with watchdog, dual-bank CRC-32 bootloader with auto rollback.
Interactive CCS Kiosk built on Renesas RA6M3, RT-Thread & LVGL.
pydafruit_gfx is a python tool to quickly prototype Adafruit GFX displays in python.
WiFi-based MQTT LED badge for real-time battery SoC display using ESP8266 and addressable LEDs — fully 3D printable.
I used STM32CubeIDE to blink an LED on RT-Spark board. This is a simple guide for firmware basics, shared on GitHub and here.
Make Project Connect witch LCD HMI(china) LCDHMI FYU43T4827
Turn your garage into a smart space with real-time vehicle detection, distance, temperature, and humidity monitoring using KiwisIoT.
An M5Stack AtomS3R a cube sized Esp32 with a 128x128 screen turned into a wireless mini monitor.
A small range Volt-Meter with good accuracy, all done with a very minimal setup.
This breakout enables you to use a single button to power on and off your project while also using the same button as user input!
I’m going to build a compact edge-AI predictive maintenance system for small electric motors
Unlocking broken, undocumented commercial smartwatch by bypassing write protection, mapping hardware pins, and running custom nRF52 firmware
