13.7x more power than its predecessor. Discover the CanMV K230—a 6TOPS RISC-V powerhouse designed for multimodal AI and edge computer vision
Sandboxed WebAssembly apps on ESP32-S3, nRF5x, and STM32
The goal of this project is to develop a tool that will be used to help diagnose issues with I2C buses. There are already a number of I2C sc
Master high-order kinematics and multimodal AI on your desk. miniHexa brings 18-DOF bionic movement and ESP32-powered vision to the maker.
Build a handheld NES that runs at 60FPS for under $20 using the ESP32. No programming experience required.
An open-source FIDO2 security key built on STM32L432KC, featuring AES-256 encryption and a custom C# SDK for secure authentication.
A touchscreen dashboard for the DFRobot UNIHIKER M10 that controls a Raspberry Pi 500+ over the local network.
Ditch the complexity! Master ESP32-S3 vision and Mecanum physics with miniAuto—the ultimate affordable gateway to offline AI and robotics.
Move over, bulky research bots! Master multi-terrain agility and AI vision with miniHexa—the agile, ESP32-powered hexapod built for your des
Stellar Vision V1 is an advanced ESP32-C6–powered assistive Braille console, designed to deliver accessibility at an affordable cost !!
A Raspberry Pi PICO powered Synth using CD74HC4067 Multiplexer
Homemade clone of Arduboy FX game console, in an Arcade bartop format with battery voltage monitor (8 bit dual core)
Modern DIY version of an iPod using unihiker
The MC80F0708D-P from ABOV Semiconductor (formerly ABOV/LG Innotek lineage) is a solid drop-in for many legacy 8051 designs—enhanced core
You want to run MicroPython on a PSOC™ Edge Kit? Here's how to install and program your PSOC™ Edge E84 AI Kit with MicroPython.
Where every switch flip is a lesson.
Bridging the gap between the simplicity of a microcontroller and the power of a Single Board Computer.
Creating and Simulating Testbenches
An Arduino core for the STC8H8K64U that brings full C++ via a RISC-V emulator. USB upload, no programmer needed, under $1.
This project creates a simple block design utilizing a Test Pattern Generator and an vdma on Vivado+Petalinux 2025.2 using Ultra96v2
Building an parking sensor using the BGT60 Sensor from Infineon!
This project implements an Amateur radio operator-oriented clock with features intended to help in the Ham shack or portable operations.
Exploring Zephyr RTOS on FRDM-MCXN947 through hands-on board bring-up, build system understanding, and real-time firmware deployment.
This project walks through the process and caveats of installing the 2025 versions of Vivado, Vitis, & PetaLinux on Ubuntu 24.04 LTS.
