A upgrade to my SMD Hot Plate with a larger hot plate, better cooling and updated software.
Build a function generator with an Arduino Nano and a AD9833 Programmable Waveform Generator module.
Test transistors, diodes, thyristors, resistors, capacitors and inductors. Also identify their leads and obtain their component value.
This is my version of a data logger using a INA219.
Build your own temperature controlled Soldering Station
A triple Channel VFO capable of generating frequencies between 8kHz to 160Mhz using an off-the-shelf SI5351 module.
An Arduino based meter to measure inductors.
Build a neat project that allows you to effortlessly bond wires while only utilizing one hand for both the solder and soldering iron.
SMD reflow hot plate with a 200mm x 100mm surface area
A simple tool to measure speeds of rotating objects
A 3D printed measuring wheel displaying both metric and imperial measurements.
With just a few minutes make a simple oscilloscope good for measuring frequency, testing capacitors and much more.
Build a neat soldering glove attachment that allows you to effortlessly bond wires while only utilizing one hand.
Build a rechargeable portable function generator with an Arduino Nano and a AD9833 Programmable Waveform Generator module.
Build a function generator with an ATtiny3216 micro, a AD9833 Programmable Waveform Generator and digitally controlled amplitude.
This is my idea of a smart Servo controller as a TOOL to help me with my Remote Control Cars, planes and R2D2
A compact power meter. build to work with XT60 connectors
Rebuilding bike pedals often calls for specialty tools that might cost more than new pedals. This is how to make your own.
A quick bed leveling tool for 3D printers.
A hand held LED tester and calculator that can measure the forward voltage drop and determine the value of the current limiting resistor.
10 Magnets and 2 Hall effect sensors form a angle encoder which is used to measure angles that are displayed on a OLED screen.
USB PD powered reflow table for easy PCB assembly
The "Micro Cl1ck" project is a custom, programmable macro-pad, designed to enhance productivity through customizable shortcuts and controls.
Here I built a simple digital voltmeter circuit with a PCB using ICL7107.
