An analogue proximity circuit built with active and passive components
Don't you want to be notified of parcel delivery with messenger app? Let's make things around you smart!
An experiment using a soil moisture sensor based on Arduino.
Use a light to change the pitches played by three Circuit Playground Express boards.
When the button is pressed and the temperature is greater than 20 degrees Celsius, this temperature sensor will light the LED.
A quick and easy way to be reminded and to track the delivery time of your mail every day.
NB-IoT data transmission how to use BC95G modem based shields - NB-IoT upload sensor data to cloud using UDP and JSON.
I am very excited because today I am going to show you this tiny Arduino compatible board,
Automated waste segregation using Arduino, sensors, and servo motors to sort wet/dry waste, reduce labor, and improve urban sanitation.
Easily build an indoor environment sensor device with Zio Qwiic modules.
The OmnIoT SoftHub is a low/no cost "no-programing-required" IoT edge platform. Implement your IoT edge applications in hours, not months.
This robot utilizes a sonar sensor in order to gather data on its surroundings and uses that received data to navigate the area around it!
In this project, we will monitor the room lighting using a LDR_NSL19_M51 light dependant resistor (LDR) and 4Duino.
When the light is on, there is no move from the servo. When light is off, the party mode begins, the servo lights up and the LED-S show off.
Earthquake sensor using the Sigfox network.
Come to make a smart cup mat to remind you drink water!
Don't touch a thing! Let Infineon's Radar Shield2Go do it for you. Learn how to automate a trash can with the XMC2Go and Arduino IDE!
Use RedBear Duo to read from a sensor array and report data to the Particle Cloud.
🛰️ Small satellite that was build for local CanSat competition 🚀
The Heart monitoring system is the most common management system to detect heart attacks and expected heart failure, before the ECG
Our device was a self-powered, wireless sensor node for use in Internet of Things applications.
This project is a modern rendition of the aforementioned device.
This sensor is used to monitor fire at home or in a workplace, and beeps the buzzer whenever fire is detected.
Made a face mask with PCBs and added WS2812B LEDs with ESP8266 on it.
