In this tutorial we will learn how to detect a soil moisture using a moisture sensor and flash a green LED if everything is ok
Saving energy and your electric bill, our Motion Sensor Light can give you the piece of mind knowing you are saving energy. and your wallet.
Let Arduino pilot photocells and other home automation sensors connected via the BlueBus Technology.
Display changing voltage of an LDR on to the 7-segment display, which is a low-cost alternative to an LCD for such applications.
An IoT-based system that detects elderly falls in real time and instantly sends emergency alerts for faster response. 🚑📡
Best practice when making Touch Board sensors.
An inexpensive foot-traffic monitor easily adapted for anything from security and road traffic control to retail marketing!
A Modular, solar-powered Edge AI acoustic system protecting forests & oceans with sustainable, real-time monitoring.
Learn how to create a real-time environmental monitoring system with the Raspberry Pi Pico W and ThingSpeak!
A simple project, making a vibrational sensor module which can be used with microcontroller digitally and brief theory behind op-amps
One of the best ways to understand cardiogram data is to view a pulse graph!
Do Photons make noise? - Yes, they do. But here we are going to produce noise using a buzzer according to the intensity of light (Photons).
An NTC thermistor model is presented to be used on Cadence ORCAD Pspice, with a temperature input given a user driven voltage
This project aims to build a portable breathalyzer using the gen4 Display module.
Ever asked how to control a light switch without touching it? Today we will learn how to control our home light switch by just handclaps.
In this tutorial we will approach how to get start with DEMO Board BGT60LTR11AIP
A central hub using the LinkIt One board that provides environmental feedback available to be accessed by network devices.
A wristband promoting sensory-friendly environments. Visual aid that shows if an area is too loud.
In this project you’ll discover how to design and create a Multisensor Shield for the ESP8266 Wemos D1 Mini board.
The mobile workplace monitor uses the NXP Rapid IoT and its sensors to monitor if a workplace is hazardous or not.
Open-Source ZigBee-based light and environmental sensor with ZigBee2MQTT support for your Home Automation with I. e. Home Assistant.
Instead of pressing the remote controller button, let's use a gesture sensor to unlock the office door!
Use a 3-wire inductive metal sensor with a LeoStick.
This project demonstrates a low-cost and sensitive walkthrough metal detector.
