A small, simple and low-cost water flow meter is designed, built and tested using a Programmable Mixed-signal Matrix.
A heart rate sensor that measures BPM and SPO2 and a temperature and humidity sensor. All data are displayed on the TFT touchscreen.
This project is about how to make an easy and cheap alarm device by youself. All you need is basic knowledge in electronics and Arduino.
This project walks you through integrating common sensor types on the RA8M1 Feather SoM.
This project is for the Spring 2018 MEGR 3171 Class. It uses Particle Photons to measure the temperature in two separate rooms.
In this tutorial we will learn how to Display a temperature using a servo motor as a gauge and a DHT sensor
Let's detect door open/close while using sleep mode function of the board!
The way out of the one-way street.
Bela Mini is the latest evolution of Bela, the open-source platform for responsive audio and sensor processing, based on the PocketBeagle.
Use a General Purpose Microcontroller to replace your Custom Chip
Display changing voltage of an LDR on to the 7-segment display, which is a low cost alternative to an LCD for such applications.
Learn to set up and program ESP32 development board — Wi-Fi & Bluetooth enabled IoT projects made easy by YaranaIoT Guru
An IoT-based smart door security system that detects intrusions instantly and sends real-time alerts for enhanced home safety. 🔐📡
Built a device to perfectly 'Split the G' in Guinness using sensors & Arduino! 🍺🔧 Heading to Ireland to test it.
Get started easily with your PSOC™ 6 kit with Arduino's easy-to-use platform. Simplify your projects and bring your ideas to life!
This thermometer is used to scan body temperature as required by SOP of COVID 19
A smart fire alarm system that uses machine learning methods to detect fire possibilities and warns via both SMS & Buzzer Alarm. 1
Transform your Halloween with our Radar-Powered Choco Dispenser! Wave at the pumpkin and watch it magically dispense for trick-or- treat
You will learn how to develop a system to detect when the refrigerator is with few ice cubes.
Hi There, I’m back with another important and interesting article on Using raspberry pi pico LCD. Today we’re going to discuss Interfacing I
Measures pH, dissolved oxygen, temperature, conductivity, CO2, and humidity and uploads data to the ThingSpeak platform.
Find out how to use the Light Up Board with textiles.
For this project we will use Arduino Uno and BMP280 along with LCD 16x2 display module to display temperature and pressure values.
Interface the TMG39931 with an ESP32 module which can send the sensor data to your application software.
