Construction of a terrestrial drone or inspection or rescue rover, equipped with the RSL10-SENSE-DB-GEVK sensor module.
Learn how to combine Infineons "2Go" boards with Arduino Uno boards in a plug and play manner while keeping your voltage levels right
ESP32 monitor your windows in your house and report if the window is open or closed via mqtt
This project will show you how to make a line following robot.
WS2812B LED embedded Glasses!
A solution based on the ETSI TS 103 757 standard using a oneM2M-based system for real-time pandemic detection and risk forecasting.
Record the changing temperature and humidity values in Excel using Surilli GSM and a tool named as "Tera Term."
I grew a potted plant but it ended up with yellow and dead leaves due to water shortage. So I made an auto-watering device here.
It is a project to measure temperature inside any building, storage, room, etc using LM35 sensor with Bolt Wifi Module
Read humidity and temperature using T9602-5-D-1 sensor through ethernet. Compatible with any HTTP capable controller (Home Assistant, etc).
In this show, Lakshantha will explain how to use Wio Terminal along with the software and present you with fun demos as well!
With the LM35 and the Bolt IoT device we are able to get the temperature around us and can predict the temperature that can be in future.
Connect to the Touch Board, even through wood!
In this project we will monitor the room temperature using a LDR_NSL19_M51 light dependant resistor (LDR) and 4Duino.
Combination of an Arduino Uno and ultrasonic sensor for security in different ranges.
DIY Solar Power Meter is a low cost ESP32 based handheld device to measure Solar Irradiance, Tilt, and Azimuth
The kitchalarm notifies you when your kitchen is empty so that you don't have to stop working to check for yourself.
Did some modifications to the previous Voronoi Lamp Project
Why pay $100+ for an IAQ monitor? Make one with the XIAO SAMD21, BME680 Sensor & 12864 OLED using Adafruit's SSD1306 library. Full Build.
This a simple Humidity Checker from ground-up within few minutes of using the Breadware's prototype hardware without any prior knowledge.
Create a smart air quality monitor perfect for spaces like a baby room, using a Raspberry Pi, SEN55 sensor, microphone, and smart plug.
Read environmental data using a DHT22 sensor, display the readings on an LCD, and enable remote data access via SMS using a GSM module.
This project uses the AS7341 sensor to make a detailed comparison of several types of light bulbs commonly used in the household
Controlling few functions of your computer and other applications using hand gestures.
