An ESP8266-based IoT system that monitors lighting, temperature, humidity, and current consumption through the KiwisIoT dashboard.
Control a low-voltage LED remotely using a NodeMCU ESP8266 and a simple KiwisIoT dashboard switch.
AquaSentinel warns you before water systems fail: it spots leaks and failing pumps early and rations scarce water fairly.
AlgaeSense uses AI & microscope camera to see algae cells and control its environmental parameters for growth and harvesting.
Build a connected weather-monitoring prototype that detects rain, measures temperature, humidity, and atmospheric pressure.
Monitor battery voltage and temperature remotely using a NodeMCU ESP8266, DS18B20, voltage sensor and KiwisIoT dashboard.
Detect finger touches using a TTP223 capacitive sensor and NodeMCU ESP8266, then monitor the digital status remotely on a KiwisIoT dashboard
Replica of Broken Narsil sword from LOTR, equipped with electronics.
To help blind and elderly people to move safely without hitting obstacles. Low cost automatic vehicle that scans and avoids obstacles by its
Turn your Android phone into a free AC and DC clamp meter using its built-in magnetic sensor. Measure current on single wires or two-core ca
Read an analog pulse sensor with a NodeMCU ESP8266, estimate heart rate in BPM, and visualize the transmitted readings on a KiwisIoT dashboa
We built a solar-powered water tank monitor using M5Stack C6L and Meshtastic to send alerts when water runs low.
Monitor farm temperature, humidity, and animal proximity in real time with ESP8266, a buzzer alert, and KiwisIoT.
Project #28 – Sensors – Shake Sensor – Mk31
Use ROS 2 to connect two PSOC™ Edge E84 AI Kits: one measures acceleration, while the other’s LED stays on at rest and blinks when moved.
Integrating a Galil controller and Keyence laser via Python to deliver real-time 3D topographical rendering and surface analysis.
Hide custom IoT sensors in plain sight. This rugged PETG-CF enclosure masquerades as a sleek, edge-lit solar LED fence light.
A real-time, low-power room multisensor station designed on an STM32 Blue Pill using native FreeRTOS tasks to monitor ambient conditions wit
Detect motion and monitor the PIR sensor status remotely using a NodeMCU ESP8266 and KiwisIoT dashboard.
Monitor electrical current, temperature, humidity, and motion in real time using ESP8266, ACS712, DHT11, PIR, and KiwisIoT.
ESP8266 monitors temperature and vibration using DS18B20 and SW-420 sensors, with real-time KiwisIoT dashboard alerts.
Monitor gas-sensor readings remotely using an MQ-2 sensor, NodeMCU ESP8266, and KiwisIoT dashboard over Wi-Fi.
A deterministic, 6-task FreeRTOS room monitoring system on the STM32F103C8T6 using STM32Cube HAL, Wokwi, Unity unit tests, and Cppcheck.
A hygienic, water-saving tap that opens automatically when hands come within 15cm using HC-SR04 and servo.
