This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.
Meet the little black rover that can do many things in your house without bumping into a single thing!
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
Create an Arduino 101 bot controlled by Johnny Five over Firmata BLE!
It is a self guided rover which is work based on GPS data. In this rover no need to control rover by any external device.
RB-0 is a hobby sized rover that uses the same suspension concept as NASA's newer differential-bar rovers. It uses a Jetson Nano + camera.
Build an obstacle avoidance car using Raspberry Pi.
This is a self-contained 3D-printable rover track that can be reused on your projects.
A simple Arduino/ESP32 crawler with PS4 BT remote control, but with 2x MCU and an advanced CAN-based communication ("drive-by-wire").
Augmenting the Arduino101 BLE Rover with sensors for autonomous driving.
Arduino 101 rover project using Mecanum wheels and Blynk.
Till the completion of Cute Drawing Buddy V1, SCARA Robot - Arduino I plan for a another drawing bot, main aim is to cover a large space.
A rover that runs on wheels using Raspberry Pi 3 and is controlled remotely through hand gestures! (With the use of Myoband.)
Using LeapMotion, Java and the web services of the Particle Photon, I created a simple Rover Bot that uses leap motion controls.
Converting a rover to use the Arduino 101 including the Bluetooth Low Energy (BLE) radio and 6-axis Inertial Measurement Unit (IMU).
Roger Bot can be custom programmed, in addition to its built-in Bluetooth program for its robotic arm and rover capabilities.
Clean your yard from your smartphone or preset a job for AYSE to follow!
Build a weatherproof outdoor rover for less than $500 with a Raspberry Pi and Viam.
The Rover project used Azure
A rover project with blinking LEDs.
I'm incrementally re-purposing the AWS DeepRacer for general purpose mobile robotics tasks including parallel-parking and lane-following.
A simple rover for line following made exploiting the ARTe Arduino REal-Time eXtension.
Finally SunFounder has moved away from the acrylic pieces and moved to stamped metal assemblies. Ezblock Studio has matured!
We use The Tactigon Skin (T-Skin) to control our tracked rover by moving our hand!The rover robot is Arduino base robot with BLE
