Thank you JLCPCB for sponsoring this project. Please order your PCB at jlcpcb.com/RAT
This Qspice simulation is based on a Pulse Width Modulation NTC thermistor temperature control with the Ramp Voltage modelled in VERILOG
This article describes the High Voltage GreenPAK IC configured as an integrated smart PWM fan driver.
Learn how to control a brushless ESC and ducted fan using a Raspberry Pi Pico and MicroPython, with safe indoor throttle limiting.
This project is a complete thermostat based on a optotriac controlled with a PWM process(Pulse Width Modulation) and a NTC thermistor
3-Wires/4-Wires FAN Control and Over Temperature Protection using LM35 and ATTiny13
A simulation in Qspice of PWM temperature control of a thermolectric Peltier element with NTC as temperature sensor
A compact DAQ system combining measurement, PID control, and motion control to simplify industrial and lab setups.
In this simple tutorial, we’ll learn how to create a frequency sweep using Arduino and Visuino. Watch the Video!
A RGB controller with 3 knobs for each color, wide supply voltage and reasonable driving capability. a laser-cut case is designed too.
Horticulture easy - PWM/LED Controller Pico/Pico_w/Pico2 + waveshare_res_touch3.5
Demonstration of the application of DC Motor Control using a H-Bridge Converter.
This project presents how to program a compact yet capable Li-Ion battery charger.
This project describes how to protect an unprogrammable servo from overload risk caused by mechanical problems using a GreenPAK™ IC.
This article describes how to create a smart lamp with brightness intensity control and motion sensor using HVPAK.
In this tutorial we will use the built-in RGB LED on Arduino Nano ESP32 and Visuino to make dim the LED using the Pulse Width Modulation.
In this tutorial we are going to read the Duty Cycle of a PWM signal using Visuino.
Integrate a custom AXI4-Lite PWM peripheral into a Nios V system on DE10-Lite board and control it via software using memory-mapped I/O.
Arduino PWM Signal generator with I2C LCD! There are 3 modes: Manual, Flasher and Breathing. Adjust speed / duty cycle with pot. Smart & com
Using PWM to output sound wave with a different frequency, so as to play music with the buzzer
How to control a servo with AmebaD RTL8722DM?
How to make and mix glitch-free sounds dedicating Core1 of a Raspberry Pi Pico (RP2040) exclusively to audio processing.
Soft start, soft stop, voltage compensation, and a dust collector made from a jar
