Add that much needed remote temperature sensor wherever you want, no wall outlet required.
Feeling cold? Using this project will power on a heater when the temperature in your room gets below your desired comfort setting.
Pixie is an interactive smart plant device created using a microcontroller, a number of sensors and 3D printed parts.
Creation of a mini-station to get t° and light levels, stepcounter and deep-breathing counter to get info about body state and relax
LM35 sensor records the temperature inside the fridge and if an anomaly occurs, an alert sms, call, mail, whatsapp is immediately received.
To detect anomaly obtained in the temperature and send an alert message via message, mail and Telegram message.
How to setup an Espressif ESP8266 and publish any event to Wia!
This easy project is slightly above a simple temperature detection project as we utilise a MLX90614 sensor to detect an object temperature.
This project will learn you how you can build a temperature controlled fan.
A step forward process to make special IoT hardware work with different IoT platforms and create advanced IoT applications.
Never mourn a dead, dried-out plant again when you use this Plant Health Monitoring System
You will never forget your beer in the freezer again or burn your tongue on hot tea.
I have been working out of a book and I thought of adding some extra oomph.
Temperature, humidity and CO2 level inside a face mask were checked before and after 30min of being inside an appartment and outside.
The tire temperature acquisition module aims to measure the tire temperature, sends the acquired information to the car's CAN communication
It's winter. Don't let your car run for 20 minutes just for a little warmth. Build this WiFi-connected heater and spare the pollution!
Monitor your wood stove all winter to make sure it stays in the goldilocks range so that you prevent overtiring and the fire from going out.
Sending data from an Arduino microcontroller to the ThingSpeak platform using a GPRS module, specifically the SIM800.
The app helps you to have a break after every 30min of work and continuosly provides info about luminoscity, t°, humidity, air pressure
An automatic humidifier makes your winter more comfortable
Monitor bird behaviours in your bird feeder. Count number of birds, frequency during the day, and types of birds visiting you.
Create a temperature monitoring app using Intel Edison board and XDK IoT Edition.
You'll create your IR Thermometer to very temperature in people.
In this project, I am going to demonstrate to you how to log data from LM35 temperature sensor values to an SD card and store it as CSV.
