It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.
Lulzbot Mini 2 3D printer fan and LED lighting control using a Nextion HMI display, Arduino and ultra quiet Noctua fan.
A project to prevent access of suspect Covid-19 positive in office or community. M5Stack Core Grey, RFID unit and NCIR body temp measure
A super-fast and super-bright flashing LED light, perfect for growing plants (and you can record the temperature too)!
Temperature and humidity monitoring using DHT11 and a 16x2 Liquid Crystal Display.
This project monitors temperature and humidity via web.
A compact air quality, temperature and humidity monitor enclosed in a small wooden chest, with a four-row LCD display.
Using the mcThings IoT platform and Wia.io for visualization, we'll measure temperatures and display the data for visualization!
Use native C# code on Windows 10 IoT Core to read the DHT22 temperature and humidity sensor with the proprietary one wire protocol.
I needed to set a large number of ds18b20 sensors up and I had to record the address and position of each sensor.
Get connected to Adafruit IO using MQTT! This project explains how to stream DHT22 temp data to Adafruit IO's dashboard!
Sending IoT Long Range Wireless Temperature and Humidity Sensor Data to a Google Sheet.
Bongilcheon High School_Innovation Lab Project.
The goal of this tutorial is to enable you to capture and send data to cloud from your Raspberry Pi.
A smart coaster for monitoring the temperature of your coffee and notifying you before it gets too cold.
Use the Arduino IOT Cloud to set a temperature goal and switch a red and green LED on /off to represent
Blynk app allows selection of a desired temperature. A space heater turns on once actual temperature drops below desired temperature.
It's a simple temperature sensor based on a thermistor and PSoC.
A MAX32620FTHR managed, solar-charged, battery-powered hub of I2C sensors that publishes data to a web dashboard from remote locations.
Generate and Sell verifiable IoT data with blockchain!
Application notes for Pmod TC1 and Arduino Uno. In this app, the temperature value is displayed on the serial monitor.
The comfort level was symbolized by blinking 5 different colored LED using HUMIDEX (a combined parameter of temperature and humidity).
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
A filament dryer for the Creality Filament System (CFS).
