Carrier/dev/breakout board for the NodeMCU, complete with deep-sleep, onboard DHT, level shifter, external sensor/servo header and V select.
Baby icon changes colors as fever temp changes (green, yellow, and red).
It notifies through email or sms when emergency situation occurs.
A digital thermometer built from scratch using Attiny85 and ds18b20 temperature sensor, which can run on a CR2032 over 130 days!
Have you ever wanted to track your Grilled Cheese sandwich? This solves all of your problems!
Averaging temperatures over 60 seconds smooths some of the sensor limitations, allowing for a smoother graphic.
Simulating IM thermal and electrical with all available parameters that effect motor operation in real environment is a good contribution.
Precise irrigation of paprika by using weight sensors to reach the optimum and required plant growth.
The objective is to decompress clinics and hospitals to reduce the time of exposure of health personnel to the COVID-19 virus(Based M5Stack)
Voice control using Alexa is popular for a number of applications. This project shows how to connect an Ultra96 (Arm & FPGA) with Alexa.
Using the Micro:bit & xCHIPs assembly of this temperature monitor is effortless. Coding is a piece of cake with the blocks of software too!
Real-time temperature monitoring, location tracking, and alert system implemented using LoRaWAN devices on Helium Network.
ws2811 addressable RGB LEDs are Great for producing different colors. Let’s make a ws2811 RGB LED Controller For controlling the Pixel LEDs.
Let's use the LED Matrix of the most recent iteration of the Arduino Uno - the R4 Wifi - to plot the current temperature read from an SHT40
This is a tutorial which can help you to use DS18B20 temperature sensor
The system can make the heater work according to the temperature which has been set.
Botanic lab monitor: temperature, humidity, plant canopy.
Add Sensors and device control quickly and easily to LabView without having to add any drivers!
I made a lot-based plant monitoring device. From this device, you can measure the condition of your plant from anywhere in the world.
Control your coffee pot remotely. Receive a signal when complete.
Use this project to get started on your first Pynq design using the Pmod Hygro to monitor the temperature and humidity of your environment!
If our pollution adversely affects the environment, then, it's our responsibility to protect the environment, humans, plants, and animals.
A fully-equipped, low-cost urban quality monitoring system for cities in developing countries, powered by Soracom and AWS.
A Tiger Mountain project for an outdoor light powered by 120 A.C. or 12 VDC With motion control on/off web control, Weather.. Add more?
