Curismo uses Walabot to detect when a user picks up a pill and a custom Alexa skill to help user keep track of their daily pill intake.
A door, just smarter. Retrofit "smarts" into the traditional entrance and never leave your door unlocked again!
Hello guys, I would like to share my project which measures temperature, humidity and distance.
Use this project to control the LEDs on the Raspberry Pi Sense HAT.
Hand Hygienics aims to reduce spread of Covid-19 through contact.
Monitor noise levels using Tessel, Google's Location API and Ubidots
How do you determine the PH value of your pool...
Programming ESP12F Module with NodeMCU without using "FTDI with Flash and reset button method"
BLE connected Thunderboard Sense 2, external located, weather-resistant, 3D-printed housing and ThingSpeak data comparison.
Easy to follow instructions to build, test and add device tree overlays to BeagleBoard. org® community repository for click boards™.
Measure activity levels in rooms using Microchip's AVR-IoT development board and analyze the data through Google Cloud.
In this tutorial we will learn how to use DHT21 Humidity and Temperature Sensor with Arduino and display the values on the OLED Display.
In this project, I'm going to explain how to make a simple IR proximity sensor using IR LEDs and LM358 Dual Op-Amp.
In this article, you will learn how to trigger a load according to the time the position sensor is actuated.
Interfacing an Infineon Distance2Go radar sensor with a cybt-213043-mesh Bluetooth LE device to create a radar obstacle detection system.
This ESP32-C3 Color Detector demonstrates how accurate and efficient color recognition can be achieved using a dedicated TCS34725 sensor
A gas leak monitoring device with adjustable sensitivity for detecting natural gas with voice prompt warning & ventilation for fire safety
In this CSV Data Logger guide on Raspberry Pi Pico, we captures the temperature readings from an onboard sensor and write into CSV file
Metal detector is a simple electronic device to check for the presence of metal during the inspection.
This tutorial will give you the basic understanding of running the 6LowPAN stack on the RAK iTracker using the Zephyr OS distribution.
By utilizing the Seeed Studio hardware and Azure IoT Central, we could build a simple indoor VOC detection and alarm system.
Basic starter tutorial with this deluxe kit: showing interfacing and using the sensors and board given in the kit.
This product is designed to monitoring the quality of air continuously for COPD patient.
This little platform is designed for low-latency audio projects, building upon the tiny PocketBeagle computer.
