Better code for the MMA8452Q
We show here how basic emotional responses can be captured by measuring GSR/EDA using ProtoCentral tinyGSR GSR/EDA sensor.
GoPro cameras are expensive, so we're using the camera's undocumented BLE client API and an ESP32 to notify when it's out of range.
Turns your M5StickC with the ToF HAT into a laser rangefinder.
You'll learn how to design your first combat robot using Arduino.
This project aims at implementing a powerful platform for connected home applications using an 8-Channel RS232 Relay and various sensors.
Collecting massive amount of data, with a managed and serverless architecture so you don’t get yourself burned in the process.
The goal of this tutorial is to enable you to capture and send sensor data to cloud from your NodeMCU device using Arduino IDE.
How well, or how differently, do different sensors measure environmental data? A comparison of two units under different conditions.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
IOT refers to small devices equipped with direct internet connectivity. Learn IOT top to bottom with this remote temperature sensor project.
Send temperature, information as Telegram messages to your phone every half-minute via Python3 code using Bolt IoT.
This system eliminates the manual tasks of connecting SD cards, transferring images, and labeling data for Edge Impulse.
The SPO2 meter, readily accessible with its affordable pricing and user-friendly code, facilitates easy development for anyone worldwide.
In this tutorial we will learn how to measure the Sun UV Index using ML8511 ULTRAVIOLET Sensor. Watch the Video!
The purpose of the article is to create the most detailed assembly instructions how to make your first do-it-yourself radiation detector
WITRA enables you to use the movements of your arm to control how a robot arm will move around, all done in a natural and intuitive way.
RF433MHz Transmitter/Receiver Module Interfacing with MCU
Brake System Plausibility Device is a required non-programmable circuit in Formula Student competitions around the globe.
You have two sensors, having the same I2C address, which you want to connect to your ESP32 by using a separate I2C bus for each sensor.
Raspberry Pi Air Monitoring HAT | Real-Time PM Sensor For Raspberry Pi can be used to monitor real time air quality of your nearby areas.
Check this project to get started getting temperature data using Meadow's Bluetooth capability with a.NET MAUI companion app.
This project provides a Multisim simulation showing a resistance divider with an NTC thermistor with temp. driven by a voltage
Utilizing TLV493D 3D Magnetic sensor to visualize a magnet's NS pole direction, heading, magnetic field line & strength on an E-ink Display.
