Build a simple touch detection system using a touch sensor and an LED bar for display.
We'll craft a cheap dry box that shields filament from air exposure, preventing moisture, and dispenses it directly to the 3D printer.
Program a micro:bit with Mbed to read switch A/B, ADC, accelerometer, magnetometer and display data on 16x2 LCD.
This project uses an LM35 sensor and Bolt WiFi module to measure the temperature change in a refrigerator.
Building a "Solar Power measuring Junction Box" with solar charging a 12 VDC Battery light sensing and Temperature Sensing going to MQTT.
Learn how to use the infrared receiver (U24) of Snap Circuits to detect input from remote controls with the micro:bit.
Use Edge Impulse to train a model for detecting gestures with the onboard accelerometer.
A walkthrough of the basics using the EMQX open-source MQTT broker. Learn how to install, create users, connect, publish, and subscribe.
It can be interfaced with all kinds of electronic components including sensors, displays, cameras, motors, etc.
Made a custom 3D Printed Thrmeometer from Scratch using TTGO T Display and DS18B20 Sensor.
The project aims to develop a rapid, cheap, and sustainable spirometer that could measure important breath parameters in real-time.
In this project, we design a wireless sensor hub using ESP32 and Arduino connected via NRF24L01 transceivers.
If you've ever needed a sensor to examine the cleanliness of water a turbidity sensor is what you need
Are you ready to add a little Arduino to your Halloween decorations?
Enabling the WiFi Hydroponics meter to measure dissolved oxygen.
Arduino-based motion-activated LED using a distance sensor and an LED.
I outline seven different techniques to measure the length of a telescoping EMT conduit pole, and demonstrate a photoresistor-based method.
λ°μ½λλ₯Ό ν΅ν΄ λ³μ μ’ λ₯λ₯Ό ꡬλΆνμ¬, μλ§μ μμΉλ‘ μ΄λμν¨λ€. By barcode recognition, the types of bottles are identified and moved to the set location. (Arduino)
Raspberry Pi Pico & WizFi360 Wireless Thermography Solution, This project use RP2040 WizFi360 GC9A01. Display on PC and Screen.
The PIR is the shorten form of Passive Infared Sensor. It detects movement. You can make anything start to work when someone is moving.
Make a DIY rechargeable alcohol detector your own.
Creating an adjustable distance parking sensor using a GrovePi+ board, an ultrasonic ranger, two LEDs, buzzer and and RGB LCD Display.
We combined our new BGT60 Radar Sensor with a "real" Infineon Chatbot and created a sweet little doorman, talking to people, passing by.
Build a "smart container app" to monitor food shipments with NB-IoT, Node and Pusher.
