This project shows how to program an Arduino Mega 2560 using Simulink to receive the signals from an R/C receiver.
Ever wanted to make an anything RC on a budget? This tutorial walks you through how to make a simple, low cost RC controller with Arduino.
Drive some awesome 3D-printed cars with a Walabot and mobile app!
Have you ever wanted to use a PocketBeagle? And build a remote car? Well, I have! Here is how you can too!
Hii Dear Friend's !! I hope you are fine... 👌 Today I wiil Show You How To Make Smart Car
Android app control Arduino RC car via bluetooth.
Arduino 101 rover project using Mecanum wheels and Blynk.
Robotics project that aims to improve rover control through the use of radio frequency and the interaction of rover movement.
Control an RC car with a computer racing wheel and in the end add a wireless camera.
This 3D printed car has amazing performance and I know you will love it!
Make a long range remote controller for your robot.
Print this rover platform choosing the blocks that fit your needs. FPV RC tank... autonomous rover... you choose!
Build a rover and control it with your Android phone.
Atmel AVR + accelerometer + 4 servo output + 6 Analog IN = Awesome.
How to make your own high current motor driver shield for Arduino which can be used to drive Robots that uses more than 2 motors. Using
A Bluetooth-controlled robot car.
Measure distance traveled on any size wheel with the inexpensive and efficient Infineon 3D 2Go Magnetic Sensor!
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Hi Guy this project is basically a small Prototype a feature that we will see in the Future Cars. This car works when you clap.
Learn how to make a cheap RC Plane 4 Channel Transmitter – Receiver Using Arduino.
You have an action-cam and a '90s toy car? Then you're just a 3D print away from a Mars rover!
Designed and built an autonomous braking collision avoidance system for a remote control car using Sonar and LiDAR sensors.
Remote control system for RC cars or any device operating on ESP32 and ESP8266 microcontrollers.
Today in this tutorial, I have made a SELF-BALANCING robot with ARDUINO. I hope this article will help the beginners to make it properly
