This amplifier can only produce bass, only low frequency sound. The maximum output of 100Watt on a 4ohm load, let's build for your bass tube
Did some modifications to the previous Voronoi Lamp Project
Make LM358 based IR Proximity Sensor at home. This sensor can work as a Touchless Warning Bell.
This a simple Humidity Checker from ground-up within few minutes of using the Breadware's prototype hardware without any prior knowledge.
ToeTap is a minimalist USB keyboard and mouse that you control by tapping your toes.
We look at the CH32V103 EVT Evaluate Verify Test boards from WCH. Study product documents, see how they are like Arduinos, but different.
Building your own voice control for navigation in a virtual environment? Without any privacy concerns? This project has the basic tools.
Do you want to realize a co-simulation on System Generator using NexysA7? Oops! Nexys A7 is not available 🤭 Let's add it ❤️
Our solution uses edge ML model to detect if someone has coughed in area and allows cleaner to record the area has been cleaned.
Porting Wiznet's ioLibrary Driver for W5300 and Network Transmission Test
This is fixed output and fixed gain amplifier, variable is said because there are 4 different type of gain output isolated from one another.
Create visibility for the runner during night time runs but embedding flashing color mixing lights in the bill of the hat.
Move over, bulky research bots! Master multi-terrain agility and AI vision with miniHexa—the agile, ESP32-powered hexapod built for your des
Simple DIY Lock using RYRR10S RFID/NFC module
Arduino and Tinkercad are two powerful tools that are transforming the world of electronics and engineering.
Capture local air quality data with your Raspberry Pi Pico Board
Real time requirements, but constrained edge device? Check this small but powerful RTOS!
This video is about XPATH and PHP. Xpath is an element in the XSLT standard. Here, our matter of interest is to use XPATH with PHP.
Prototyping expansion board for the VIA Springboard
Add Functionality To Your Development Board (Arduino, Raspberry Pi, etc. ) - All In One Snap!
We prepared and recorded a project that could be a maker product with both an attractive watch with its visuality and a capacitor meter feat
let's build a multicolour Tom and jerry themed Arduino Uno
ORB1T V19.0 ALPHA is designed for those who develop IoT projects. All the sensors and basic parts, no soldering needed.
Made a Naruto themed night lamp-based around ATtiny13A MCU and custom PCB.
