Ever wondered how to setup Raspberry Pi without even need of Monitor and Keyboard even for the first time, yes, It can be done.
A platform to convey enhanced information through multiple wearable haptic bands for a wide range of applications
With the ThingsIO. AI platform, it is now possible to monitor the temperature and humidity with sensor location in real-time.
A prototype for basic EVM.
Use background radiation to make your dice rolls! Features multiple dice types and guaranteed to make your DnD session more interesting!
Build a Wi-Fi LCD screen and control it from a phone app.
B-Hive is an autonomous electronic monitoring device enabling beekeepers to oversee their hives' well-being.
Its a cheap smart face shield which helps in protecting and maintaining social distancing. It helps in making distance from other people
Connect any sensor and measure your data.
Scan barcode to identify medicine and play audio file with medicine name, dosage, expiration date and instructions.
Connecting multiple Raspberry Pico W’s can be essential in projects involving distributed systems.
Raspberry Pi HAT Launched, Can Detect Location with Centimeter-Level Accuracy
Avalon project, is build with the idea to create a self flying vehicle. Avalon run on opensource hardware and software currently in dev
We will program a board using a USBTiny external programmer. Your Uno board has a 6 pin ICSP port where we can upload our sketch.
Use a Syntiant TinyML board, an Edge Impulse model, and an 8 Ohm speaker to have Darth Vader at your bidding for your commands!
Autonomous plant monitoring system, follows the parameters of your plants and transmits them on the Ubidots platform via the Sigfox network
The objective of this demo is to get familiar with the QCA4020 development kit and set up the development environment using the Eclipse IDE.
Autonomous embedded system measuring temperature, moisutre and brightness. The data are then available on a web interface.
This project will show you how to program and connect your Soracom Wio LTE to AWS IoT using the Soracom Beam service and an Arduino Sketch
Dealing with multiple designs can be cumbersome. This project describes how to combine multiple designs into a single platform.
In this tutorial I'm going to tell you about how we can interface keypad with 8051 and displaying keypad numbers in 16*2 LCD.
Application notes for Pmod SSR and Arduino Uno. In this app, a load is controlled from the serial monitor.
Hamparsum Note Convertor system which has historical importance is taken with Pcam5c and converted into current note system.
We made a Arcade Kiosk based on the Banana Pro.
