Inexpensive ISP/ICSP in circuit system programmer for AVR and Arduino boards
This project walks through how to create an embedded Linux image for the SP701 using PetaLinux 2023.2.
I made this development board to use in prototypes which I want for a long time. This will save me a lot of money and equal compatibility.
This is a part of the multi-functional project which enables you to run our pneumonia classifier directly on your Raspberry Pi using balena.
This project is a demo of a very simplified 2FSK baseband transmitter implemented on the Eclypse Z7 with AWG Zmod.
Edge AI sounds fun... until data capture hits? We hear you! MicroPython integration with DEEPCRAFT™ Studio makes it easy like never before.
You'll learn how to create a Pikachu Module for Arduino.
The purpose of this project is to develop the embedded software of a "Swiss Army Knife" watch in Ada 2012 on the Hexiwear wearable device.
Detecting chair occupancy in a room with AI on-edge
I want to play the congas but they are so big and heavy! How can I carry them around - with finger-sized congas, obviously!
Why not? Raspberry Pi 4b is more than capable of programming an ESP32 module via its native 3.3 V RS232 port which is available through its
Enjoy and exploring the world of Wi-Fi scanning with your D1 Mini and OLED display!
How to program a MSP430G2 Launchpad with Finite State Machines (FSM) using YAKINDU Statechart Tools in your Code Composer Studio.
I made this transistor based stereo preamplifier board to control the volume, bass and treble of my previous build TDA2030 amplifier.
This project demonstrates how to use the PSoC 5LP to create an analog alarm system. The project controls an LED based on input voltage.
A toy top based on an STM32F0 that uses an accelerometer to display POV animations on a line of LEDs as it spins!
Want to measure the thrust of your solid rocket motors? Here is the solution for it. We developed a PCB to measure the thrust.
This project presents all the steps require to build a Fast RTPS (DDS) Bridge between NXP HoverGames drone (running PX4) and ROS 2.
This project describes how to add support for ROS2 to the Ultra96-V2.
Want to chat with your electrical devices via Facebook Messenger? Here is a simple tutorial you can follow.
You'd think a technology this old would be simple. C-plus-plus software libraries help you with hardware wiring.
Pico WiFi HAT connects to the back of your Pi and utilises an ESP8266 high integration wireless SoC to connect to 2.4GHz wireless networks.
Project to show how to use xChips with a BeagleBone Black through a XinaBox bridge on the interface found on the SBC.
Smart Home Automation using ESP32
