Program a Uno form factor board with the ESP32 processor
In this project, we will interface a very popular NOKIA5110 display with an 8051 microcontroller and we will display graphic images on it.
This project walks through how to update the referenced hardware XSA file for an accelerated app in Vitis Unified 2023.2
With a cheap operational amplifier we can built a simple waveform generator which can be used to analyse the circuit behaviour very precise.
You'll learn how to create a logic to turn off the system when it is not being used for a certain time.
Fading the color of an RGB LED from one color to the next
Replace the factory thermostat of NOBO heaters with an ESPHome based device. It integrates to Home Assistant.
Learn how to use the ESP32 in MicroPython to use the onboard camera and connect to the network.
Learn to measure temperature with high sensitivity using an NTC thermistor, STM32's ADC, and the Steinhart-Hart equation for precise results
Let's build an IoT Plant Watering system for your household plant using a low cost Particle Photon and a servo motor
Fast, high-accuracy, and power-efficient detection of PCB manufacturing faults
Follow these instructions to learn the different modes of USART communication on an STM32 microcontroller with simulation in proteus
mcu8051ide comes with 10 sample demonstration code programs that could run on a real 8051 chip
My last project was able to find the distance and angle of an object. But this one can also detect the size of that same object.
Smart DIY gate module: offline license plate recognition, battery-powered, no internet or cloud, install & use in minutes.
BMP180 interfacing with Raspberry Pi in detail by using JAVA and Pi4J library.
A colorful lamp to notify the developer team for pending code reviews.
This blog details the inner workings of TensorFlow Lite for Microcontrollers and the role of Flatbuffers in them.
Digital Voltmeter with Arduino And HD44780 LCD
How to Build an Arduino Nano Oscilloscope with OLED Display (SH1106) – Full Guide with Circuit & Code
Transferring data to/from the Zynq's FPGA is an essential ingredient for integrating custom accelerators.
Here's a detailed tutorial on how to do some LED blinking using Python, with Zerynth Studio and XinaBox.
Drivers do lots of things while on the road, looking at road signs, pedestrian detection, driving around obstacles. Here's some assistance.
it can be used in the special situations which normal humans should not close to, such the High radiation zone, the High infection area.
