This project uses an ESP32 and a Sensirion SHT40 sensor to remotely monitor temperature and humidity over Wi-Fi.
In this tutorial we will learn how to turn the LED ON when darkness is detected. Watch the Video!
A scale without moving parts – impossible, you say? Not according to the result of my current project, which boasts incredible resolution.
A solar-powered AI buoy that detects coastal pollution using image and sound analysis at the edge.
The BlessTags application + CC2650 SensorTag = Motion security system!
In this project, we will learn how to make a Hexabitz Security and Alarm System.
Reduce Urban Congestion by 35-45% with Intelligent, Adaptive Traffic Control.
Make an interactive piggy bank using the Touch Board and Electric Paint.
This tutorial will show you how to connect the MPU6050 to the Seeed Studio RP2040 development board. This is a step-by-step guide.
Catch the elusive Santa Claus in your living room (or just your parents) with a Raspberry Pi. It texts you a photo of him when he is caught.
The cheapest DIY version of a WiFi node.
Made a super small Buck converter module based around LM317 that can provide a stable 5V for powering XYZ electronics.
A DIY digital camera with custom case, custom OS, and built-in film simulation. Inspired by 80s tech and the Alien films. Fully open-source.
Log sensor values such as temperature, humidity, air quality to a Notion page. The project uses Raspberry Pi running balena with SensorHat
You'll learn how to create a comunication using two Arduinos through HC-12 Module.
An innovative school project that consists of monitoring sensors and sending data to a cloud platform.
Raspberry Pi PICO 2 Powered TEMP GUN based around the GY-906 Infrared Temp Module.
An irrigation system intended for a greenhouse.
In this video we will learn how to send values from StickC board to Delphi VCL Application using Visuino.
Integration of Particle Photon with IR motion and temperature sensors to send motion and temperature alerts to operations teams.
Measures pH, oxidation-reduction potential (ORP), and temperature and uploads data to the ThingSpeak platform.
Driving 9 solenoid valves and a DC compressor using the Infineon TLE94112ES 12-fold half-bridge Shield for Arduino.
The sensor APDS-9960 is able to capture the direction of a movement.. right, left, up... let's use it to create a switch for a desk lamp!!
Humidity Sensor System DHT11 On Arduino
