This driver supports ROHM BH1750 ambient light sensor.
The device runs an ML model to detect smoke and fire in the wild. It uses LoRaWAN for long-range and low-power communications.
This project shows how to build a car that can be controlled by sound.
With Particle Cloud, IFTTT and Rotilio Maker clicking a button you'll publish the on board temperature sensor to your Facebook account.
I made a system to control the good operation for individuals sampling pumps.
In this tutorial we will use a XYC-WB-DC Microwave Radar Motion Sensor connected to Arduino UNO and Visuino to detect any movement.
Augment anything fibrous/porous to make CUSTOM SENSORS! Pressure, stretch, capacitive, humidity, or temp. sensing? We got you covered.
In this project, we will be combining the power of Raspberry Pi, Hexabitz, and a Pi camera to create a motion detection camera system.
This system used to detect anomaly obtained in the temperature in the freezer and send an alert via message & tweet.
WiFi Sensor
An LTspice simulation of a thermostat circuit with transistors, passive elements and Vishay NTC thermistors
A friendly alpaca soap dispenser that helps you wash your hands using TinyCircuits small Wirelings sensors
Hello, today I wrote my second article entitled "How to Connect Your First LoRa Device (STM32L072CZ Microcontroller)."
In this project I am going to show you how to connect BMP180 barometer sensor with Digi Xbee3 MicroPython radio module.
You'll learn how to create your PCB Robot Car with Arduino and Ultrassonic Sensor.
Integrate your Surilli GSM with ultrasonic sensor and visualize the changing values of distance on 16x2 LCD.
In this tutorial we are going to save Temperature, Humidity Data from the Dht11 sensor & Date Time to the SD card.
Develop human posture analysis functionality based on images, and use this to detect if a human is falling down in real-time.
Play Flappy Bird on the Touch Board using the NeoPixel shield.
Build a smart parking gate with Arduino UNO, ultrasonic sensor & servo motor. Detect vehicles and open/close the gate automatically
Lets build a 3D-printed rocker-bogie MARS rover using esp12e
A NODEMCU based home automation board with six relays and an onboard AC SMPS for powering the device directly from an AC source.
Possible temperature monitoring and alert system for industries, preferably pharmacies.
Publish built-in sensors' BBC Micro:bit v2 data to Qubitro IoT platform through MQTT protocol.
