A nifty light for your everyday cap that can help give light, show others your opinion when you say no or give a reaction to loud sounds.
In this project I create a custom PCB interface board for the Jetson GPIO header to make the interfaces much cleaner, and I add an IMU!
There is a lot of seven-segment display in the market and it’s widely used into the electronics as well as in electrical product. we saw
Rex autonomously fetches and sorts colored balls using LIDAR navigation and vision-based color detection, all while dodging obstacles!
Task Space Control of CRS Robot using the joint angles as input and the joint torques as output
JRFCQAI: Open-source drone framework using UNO-Q's dual brain with STM32U5 real-time flight control + Dragonwing MPU edge AI + Web GCS.
Christmas is almost here, and I wanted something bright and colorful for my decorations — so I built a super bright 3W NeoPixel LED driver
Building on LED brightness control, we’ll create a dynamic light show using PWM, smooth transitions, and fades to make it visually engaging!
A LED flashes then it stops, then another LED does the same thing, then another LED does the same thing. Then it goes back to the first LED.
We program a robotic arm to perform a sequence of tasks, including navigating an obstacle course and applying a force on an egg.
This guide aims to help users complete the simulation and control of the PIPER single arm on the Genesis Simulation Platform.
A Wand-themed Attiny13A Based Flash Light
Made an EREN YEAGER-themed PCB Art that has two LEDs connected with a 555 timer IC in BiStable Configuration.
Today we are going to unbox and review a 7-DOF AI visual collaborative robotic arm--JetCobot.
This sensor detects the water level and the module beeps when it reaches the specified range.
The website is about the final project for UIUC ME446 Robotics and Control course.
I would like to study the effects of the condo construction expansion and it's affects on the wildlife population and Plants.
A 4-axis myPalletizer bridges digital language and physical action, turning AI-generated poetry into real-world typing.
Designed a Verilog LED IP, integrated it on AUP-ZU3 with PS clocking, handled constraints, and validated on hardware.
Mooshika: Empowering Mobility and Inclusivity with an Autonomous Robot Companion for Wheelchair Users.
My code is functionally the same as stock code, but is MUCH more edit friendly.
How to make a music box, ELECTRONIC PROJECT
An interactive robot that raises stack-chan using M5Stack, Toio, and XMod, evolving when fed and sometimes flashing back past memories.
This project demonstrates how to build a four-in-one multifunctional robot using an Arduino Uno.
