LePaniPuri uses a bimanual SO-101 setup powered by Jetson Thor and Groot N1.5 to teach robots how to make Pani Puri!
He is welcome back again this time we are making a fire fighting robot also we have made a firefighting robot earlier but this time we did
How to make a Control Light sensor using LDR
Paradox RoboRumble Robot
A high-performance computing platform designed for mobile robots and intelligent edge IoT devices.
Yahboom ROSMASTER M3 is a high-performance ROS2 AI Large Model robot car engineered for Jetson Orin Nano, Orin NX, Raspberry Pi 5 and RDK X5
Control a home appliance remotely using a Telegram bot and Bolt IoT, enabling smart automation with a low-level trigger relay.
This enhancement of the open-source modular 3d-printed robot add a Micro:Bit and Motor:Bit to do obstacle avoidance
A keyboard with a total of 32 buttons on it.
Perfect for you :D
TonyPi mirrors your moves using MediaPipe pose tracking to translate your skeleton data into real-time servo commands. No magic, just code.
Robot No.2 is my summer project: a self-designed robot with moving arms and neck, built in Tinkercad, 3D-printed, and powered by M5Stack
A super small, open source, adaptable control board. Each module is 15mm and can be used to build all sorts of small robot control boards.
The project consists of a ROV5 chassis and can be piloted via IR remote. The brains of this bot are three modular Arduino Uno units.
A scarecrow designed to scare away pigeons
Automatic platform and slider movements to capture 360° figurine images. Scheduled listing tracking and feature-rich web interface on UNO Q.
What if Beethoven could actually hear what he composed? This unique low budget device enables blind, deaf and mute children to learn music!
Using a custom built PCB, an custom designed Android App, machine learning and the MSP432 to control the TI RSLK.
A singing and dancing self balancing robot which reacts to different notes registered by the microphone using FFT signal processing.
A keychain-sized AtomS3R robot that gives local AI a face and voice—learn STT, LLM, and TTS through one friendly, reproducible build.
The best way to experiment with kinematics math and control algorithms is using a simulation!
In this tutorial, we will learn how to use the heart pulse sensor with Arduino.
An existing Oil Candle Lantern was upgraded by adding a Custom Board with LEDs based on the Attiny13 architecture.
A tone-detecting, line-following, break-dancing robot car!
