Motor Driver Patch is a DIY H-bridge-based dual motor driver featuring 8 N-channel MOSFET ICs connected in an H-bridge configuration.
Lightweight ESP32-based IoT module for remote data logging enabling the collection and upload of 3D printing statistic to a cloud server
This smart lock can increase the security of your home. Security is increased with the anti-theft device installed on the device. This lock
Long-range AI monitoring with reCamera + Wi-Fi HaLow: real-time video/detection over 1 km, no network needed.
Smart Lab PSU is an open-source controller that turns almost any cheap DC-DC converter (LM2596, XL4015, XL6019, etc. ) into a Wi-Fi lab PSU
AI-driven building management system leveraging oneM2M interoperability to enable adaptive, energy-efficient, and resilient IoT operations.
Learn how to connect and control a laser diode module using Arduino in a few simple steps.
HI my name is Piyush Garg and I am 11 years old. This is my creation above. it took me about 3 weeks to complete it and I am very proud of it
A small device that allows you to push the physical buttons on your tv from your phone
A remote controlled power button for your PC!
In this project, we’ll build a compact yet powerful 4WD smart robot using a 3D-printed chassis
Have you ever wanted to control the things around your house from outlets to the tempeture without looking at your phone.
we’ll build a fully 3D-printed RC boat powered by a 1000KV BLDC motor, steered by a SG90 servo, and controlled via an ESP8266 and NRF24L01
A pocket-sized version of the Chrome Dino Game built with an Arduino Pro Mini and OLED display, letting you jump over cacti anytime
Autonomous buoy system for RC sailing regattas: GPS, LTE and real-time adjustments of 6 buoys. Simplify user experience to define courses.
Pedro 2.0 is a compact, 3D‑printable, open‑source robotic arm designed to democratize robotics education.
Remoto is a plug-and-play firmware for Arduino OPTA with MQTT, web server control, and real-time telemetry.
I'll show you how to create a device that emulates a mouse using an ESP32 board.
Compact PCB with Atmega328P & LoRa RA-02 for wireless communication. Includes USB-UART, 3.3V regulator, and WS2812 LED.
Make a remote-controlled robotic arm with ESP32
Intro into robotics, neural web and ML with arduino, raspberry pi4
Open/Close/Status garage over the internet. Supports voice commands.
Build a spooky, interactive Halloween prop - with a tiny language model running on an ESP32 (yes, regular ESP32!).
The myController S570 has high data acquisition speed and remote control ability, greatly simplifying the programming of humanoid robots.
