Develop a GUI to display current air quality values as per the MQ-135 position precisely and control a mini pan-tilt kit (and RGB lighting).
The goal of this project is to build an aquarium’s device that is connected to a GSM so that we can control & monitor it through SMS.
Design and build a portable biomedical monitor that allows obtaining a diagnosis in real-time and capable of determining possible diseases.
Learn how to connect the Particle Photon to ThingSpeak using webhooks and the ThingSpeak REST API.
How avoid a freezer disaster while I am away.
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
Monitor your energy consumption through the Arduino IoT Cloud using a MKR WiFi 1010, a MKR 485 Shield and a Modbus compatible energy meter.
Add sensors in a beehive to follow bees life.
DIY Arduino Project with Python to Display your PC's stats (CPU temp, CPU load, GPU temp and GPU load)
Replace the firmware on a Shelly Plug S with a wireless procedure (no soldering, no wiring) and connect it to Arduino Cloud!
An untested BLE reference design for reading a magnetic door contact on a nearby phone, with wiring, firmware and a test plan.
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Sometimes we want terminal capabilities from outside the bounds our network. That is, terminal to web with no port forwarding.
Get the position of your MKR GSM 1400 on your smartphone through an SMS with a Google Maps link.
Monitor patients sent to self-isolate with the coronavirus by collecting their temperature, heart rate and location with a wristband.
Variometer is instrument that indicates the changes in the altitude variations.
An IOT app which make uses of ARTIK Cloud, Genuino MKR1000, DHT11 temperature and humidity sensor and MQTT protocol.
How to make a benchtop pH meter with an Arduino Uno and the Gravity analog pH sensor from Atlas Scientific.
Read multiple sensors from a Particle Photon and Publish via webhook to Thingspeak.
This project allows you to check the temperature at home from anywhere using a web browser.
A weather clock with Arduino, RTC, DHT22 and BMP180.
Constant outages of your broadband can drive you to frustration, but you can use the Raspberry Pi, and a little bit cloud to monitor it.
Display LoadMaster PV Solar Hot Water data on a HC-12 Wireless connected Nextion Display (3.2" or 2.8"). How to use a Nextion.
Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.
