A project that can control your devices with your fingerprint. Enriched menu with features such as recording and deleting your fingerprint I
In this project, we will demonstrate ESPcopter anti-collision system with multi-ranger shield outputs.
A dual-mode Bluetooth 5.1 module that brings wireless freedom to your speakers, TV, amp, or car stereo with high-quality audio.
In this project we are covering basics of Netduino, features of Netduino, Software installation guideline and LED blinking program using C#.
Off-grid Waterproof Protection for Field Prototype Tests using a Solar Panel, Mobile Battery and a Ethernet Cable
Easily make a Raspberry Pi device controlled from a smart phone over the Internet! Send and receive data!
Creating an 5G Fixed Wireless Access gateway using FG160 with embedded application on OpenLinux
How to communicate between 2 Arduino UNOs through SPI communication protocol to exchange data or control other Arduino using one.
We can directly plug this module into breadboard and supply different voltages as our project needs.
This project in order to evaluate the pH value of the soil which reacts with a substrate and changes its color.
This project demonstrates GPIO events and serial communications with nanoFramework.
Welcome to this project where we will be creating an exciting games using MicroPython and Raspberry Pi Pico.
Allowing 24/7 monitoring of environment with instant notifications from two directions, easily deployment!
PowerPD is a compact USB-C PD/PPS power supply and PD analyzer built around an ESP32 microcontroller, an AP33772S USB-C PD sink controller,
Homemade clone of Arduboy FX game console, in an Arcade bartop format with battery voltage monitor (8 bit dual core)
This Project is use for controlling led brightness or any pwm control via UDP packet sending through Android Application.
The application of pesticides and fertilizers in agricultural areas is of prime importance for crop yields.
A custom pc based on 8085 with custom assembler and EEPROM programmer.
In this project, you will find 3D part assembly, source code, and Android application of a simple dog model robot
This project is about using siri command to control beaglebone which can drive a servo to point camera to the target.
Our system is designed to use computer vision to have an RC car follow a particular path and stop when it detects the color red.
This is a IOT Based Surveillance Car which can be controlled, tracked globally as well as its data (sensors, cam)can be accessed globally.
Create LabVIEW Web Services to provide an easy way to connected your embedded LabVIEW application to browser based GUI.
Application notes for Pmod LS1, Pmod DPOT and Arduino Uno.
