Quick build of a weather station that uses CW02(ESP32) programmed in Python with Zerynth and Ubidots IoT platform.
In this project I made a locker that opens when a correct password is entered.
Introduction to the Maker Pi Pico module, which is a compact yet feature-packed board designed for STEM and robotics projects.
Scrumtato is an ATtiny85-based gadget to keep overly passionate developers from excessively talking during daily stand-up meetings.
Building a automation system, where one can control the appliances, using the simple GSM(Global System for Mobile).
This project continues with the bare metal application in Vitis for using the Digitizer Zmod on the Eclypse Z7 in a custom design.
Build your own Arduino-based, Bluetooth-controlled RC car.
Arduino Car with Sonic sensor and Radio control Remote Control with LCD
Elevate your embedded system's display capabilities with our seamless integration of SRM32 and the 74HC595 Shift Register
I got to test out the new Analog Discovery 3 and it saved me from a bad connector on a SPI bus between an FPGA and an eInk display.
5 in 1 Arduino Robot | Follow Me | Line Following | Sumo | Drawing | Obstacle Avoiding
The Firmata Protocol is a popular Arduino focused library used by many popular boards. Now you can add yours!
In this article, I’ll show you how to make a GPS Speedometer with M5Stick programmed in UIFlow to avoid getting fined for speeding.
Count the maximum number of Taps You can do in a minute
Use ROS (running on Esmacat Master S) to teleoperate robot in Gazebo simulation environment using analog input from LCD Shield with EASE.
The KRIA KV260-ATROVER (AuTonomous ROVER) mini version - the first prototype of an autonomous self-driver rover with PYNQ
Have you ever seen a vacuum cleaner robot? Have you been wondering what was its main functionality? Then check out this tutorial!
I failed in this wirelessly programming method, But I want to try more methods because finally, we are engineers.
Adding humidity and temperature data to your DIY electronics projects sound interesting most of the time!
This project shows how to make a pet feeder controlled via WiFi. You can wirelessly control the pet feeder at any time with an app.
I designed this amplifier using TPA3116d2 ic and PCB is fully assembled by JLCPCB SMT assembly service. let's see the performance
This project is about the interfacing of MQ3 alcohol sensor. I tried to demonstrate of a Basic Dope Testing system and mechanism.
This a simple KS tracking project that uses UDOO NEO with a little server written in Python and an Arduino sketch.
Using low-cost components and a modular design, PolySynth aims at becoming your next audio engine for your upcoming project.
