ATmega328P standalone/minimal setup.
A quick and compact Arduino Nano setup with four DIP switches to allow for mode selection. Power is provided by CR2032 battery package.
Utilizes an I2S mic and I2S amp using an ESP32 with the ESPNOW wireless protocol to communicate audio wirelessly at over 600+ meters.
Small USB to Serial programmer module, with Type C port and having compatibility with Arduino micro-controller.
This project is about servo motors which are controlled by a push button. The servo motors only work when a certain algorithm is followed.
Add Minicore files and you can program ATmega8 on your Arduino IDE
Any magnetic stripe or credit card may be spoofed or emulated with the MagSpoof V4 gadget.
Use a Raspberry Pi with Codesys to control motors attached to an Arduino Uno using the EtherCAT Arduino Shield by Esmacat (EASE).
I2C Communication on Raspberry Pi using JAVA, interfaced with MCP23017, a 16-bit port expander IC that comes with I2C to the Pi.
Temperature and Humidity Sensing System using STM32 and Embedded C Programming.
Design and program the STM32 mircontroller to correctly parse the inputs from a keypad through USB and bluetooth modules (HC-05) to PC.
Simple steps are involved in making this mp3 player but we can't utilize the best without Digital to analog converters.
Application notes for Pmod NAV and Arduino Uno. In this app, all data from the Pmod NAV will be displayed in the serial monitor.
In this project we are going to walk step by step through our first Versal Project building hardware and adding in elements to the NoC
Build an amazing weather station that uses ESP32 programmed in Python with Zerynth and Ubidots IoT platform.
See what the Raspberry Pi 400 is, how to set it up, and then run a simple program.
Measure voltage, current, active power, power factor, and electrical energy with any microcontroller through UART.
Grasp the basic concepts of electronics, like what's electricity and how voltage, current, and resistance are related.
Fritzing is an open-source software to design circuits, PCB, and write code for Arduino devices. In this article, we'll learn how to design
Ever wanted to get two embedded devices communicate between each other? Perhaps you had an Arduino Uno and wanted to add the WiFi capability
I will show you how to quickly set up the BME280 Pressure, Temperature, and Humidity sensor for the Raspberry Pi Pico.
Program an Arduino with another Arduino. Then use it to upload from MicroChip Studio IDE.
This project walks through the basics of software defined radio using GNU Radio with Ettus' new B206mini USRP.
Unstructured Supplementary Service Data (USSD) network result parser with Python language
