In this blogtut, we made a simple but advanced online axial monitoring system using basic nodes of the Node-RED.
AGL (Automotive Grade Linux) demos for 96Boards based on Dragonboard410c.
This post gives a brief introduction of how to visualize your self-driving model. it can be very helpful for the model debugging.
Sensors for a car.
Gather in-vehicle sensor data (temperature, force, etc. ) to help compare with data sent by vehicle sensors.
"Every Device Makes Its Own Wi-Fi" - Not Clint Eastwood
Smart Van Box is an Open Source project that wants to become your personal assistant for your road trips.
How to use PubNub Presence for realtime IoT monitoring for devices to get device state, health and status.
Rover project using the Renesas Synergy S7G2 MCU on board a Future Designs SYG-SOM module powering a Dagu Rover5 chassis/motor controller.
Build a smart parking gate with Arduino UNO, ultrasonic sensor & servo motor. Detect vehicles and open/close the gate automatically
Driver library makes Hercules LaunchPads and Hercules micro controllers work with Hitachi type LCD.
How to install some Amazon sourced LED lighting on the windshield and the bumper of an '03 Jeep Wrangler (TJ) from beginning to end.
How to use the two pushbuttons on the new Hercules LaunchPad type II.
Use lidar, gnss, imu, chassis to know vehicle ego-pose and state, which is needed in ADAS and more advanced Autonomous Driving.
Poor man's CAN tester with 2 diodes and 1 resistor.
This application can help to test self-driving model by using video. The developer also can use this tool to understand how the model works.
Bicycle with calories burned indicator system. Data will also be uploaded to cloud for analyzing the trends in terms of calories burned.
A complete car log on monitoring the steering wheel, air conditioning, and sound system levels. It is also a dryer machine alert.
Designing a "bench tool" that will be used to develop some gadgets for use in my car in the new future, this is an ATTiny1616 with CAN bus.
This project will design a car battery monitoring voltmeter that will help drivers monitor the conditions of their car batteries.
Use an Arduino Nicla Vision to determine and alert if a driver's eyes are closed for more than 2 seconds.
This project provides a detailed explanation of achieving animated front and rear LED patterns using SLG46620 IC
Hey guys!! How are you ? I am going to do here today is how to control our bike using a smartphone.
In this tutorial we will make a Gear Shift Indicator using GC9A01 SPI Display, Arduino and Visuino program. Watch the Video!
