Custom car infotainment system with Arduino and Android head unit, interacting with the car over CAN BUS.
How to transmit and receive high speed CAN or CAN FD messages using Raspberry Pi.
A smart pollution control device is set near the exhaust of the vehicle to alert the user when they are wasting fuel and causing pollution
Build your own small autonomous car with Android Things.
Learn how to install Pivot Raizin VS-1, voltage stabilizer and HKS Mega Thick 8GA Grounding Cable by yourself with this guide.
Curious about autonomous driving, AI and neural networks? Build your own autonomous driving car and get your hands on these topics!
Monitors the temperature, voltage, and current of our high voltage battery that powers our car!
This post gives a general introduction of how to use deep neural network to build a self driving RC car.
Automatic Parking System is an easy project. Information given below demonstrates how to code, connect the various components of the system.
Learn how to connect microcontrollers together using the CAN bus by using a simple AND gate.
To extend our V2X ecosystem we are constantly adding entities. This time we added a truly crucial component: EV charging.
Use Notecard and the Adafruit M4 CAN Express to monitor CAN bus for messages with particular IDs and upload those messages to the cloud.
A Digistump-based LED strip that calculates what RPM corresponds to each gear to aid in heel-toe downshifting and rev-matching. Budget: $20
Using a particle, we connected it to an Air Ride suspension in a VW Rabbit and are able to control it through the phone.
My Tachometer failed so I replaced the original mechanism with a stepper motor, driver board and Arduino pro micro
Here is a very nice use of a sonar sensor and LCD - a parking sensor that can actually be useful.
Function of a 60's era Saab Oil Monitoring Relay restored with an Arduino Nano.
Remember Smartcar, the easy to use vehicle platform for your hobby-grade projects? It received an upgrade with ESP32 and custom chassis!
Adding an active NeoPixel lighting system to your E-Bike using the micro:bit.
Brake System Plausibility Device is a required non-programmable circuit in Formula Student competitions around the globe.
Configure the RAM space for the DMA touched memory in a correct way
Stuck choosing between Jetson Nano & Pi 5 for your first ROS2 robot? The right Pi 5 kit, like MentorPi M1, bypasses hardware headaches.
Initial project for the concept to prototype using the Ultra96V2. This project creates a MIPI image processing pipeline using baremetal
The robot tank learned to follow unmarked walkway using OpenCV and TensorFlow.
