Design and develop a simple soundcard oscilloscope under 1$
Using Eclypse Z7 to generate an FSK signal and Genesys ZU for implement a single tone detector algorithm executed in the RTU.
TINA allows you to run your non-NN operations e.g. matrix multiplication or if statements using any hardware that supports neural networks.
Deep learning to detect biosignals of the cough of COVID-19 from recordings.
Audio spectrum analyzer based on PIC32 with real-time spectrum and spectrograph visualization, serial interface, voice record, and playback.
Monitoring digital circuits can be difficult at best. Sometimes it's nigh impossible. But the Digital Discovery makes it easier!
Digital Logic circuits with PSOC are a very powerful tool. Hardware logic runs in parallel to the processor.
Detection of pedestrian while driving which are not in the line of sight of the driver by the micro-doppler signature generated by movement.
This tutorial shows how to generate FPGA IP cores using Vitis Model Composer, from modeling to deployment—step by step.
Staccato Controller (interrupter) was developed in the attempt to create longer sparks from Tesla Coil reducing the input power
In this tutorial, we provide the steps to create the hardware design to support the AXI UARTLite IP and interact with Petalinux 2022.2.
This is simple Drum Pad built with Cap-sense touch and IMX-RT.
In this project, we will make a single trace oscilloscope using the gen4-uLCD-43DCT-CLB display module.
The application receives the audio signal from the standard Windows 10 audio input, measure the level and send to the slots.
A guide from the RF Explorer team
A project to recognize "yes"/"no"/other words and respond by lighting an LED in green/red/blue colors on an Arduino board.
Detection system of the disease called bud rot (PC-Pudrición de Cogollo) in the oil palm with the use of an electronic nose.
In this tutorial, we provide the steps to create the Petalinux 2022.2 OS Image to work with KRIA KR260, Vivado 2022.2 and Petalinux 2022.2.
In this tutorial, we provide the steps to create the hardware design to support the RPi and PMOD connectors in KRIA KR260
The application is used to detect and store the signals from a MeC (Microbial Electrolysis Cell for hydrogen production)
In this tutorial, we provide the steps to create the hardware design to support the AXI IIC IP and interact with I2C using Petalinux
A smart device that accurately monitors and detects running faucets using a machine learning model with Nordic Thingy:53.
Custom 2 GSPS 4K FFT optimized for AMD Versal AI Engine and AI Engine ML
A small adjustable and multipurpose class A amplifier which can be used to pre amplify the signals before giving into power amplifiers.
