Our project will capture local data, send them to the cloud, where everyone can see them through the internet, acting remotely from there.
A small low power node that clamps onto an existing water pipe, listens to its vibration, and uses a tiny ML model on the nRF54LM20 to flag
Using the power of motion, swipe in 4 directions to change the color of an LED!
Discover your 'Comfort Zone' while Travelling, sense your new surroundings
A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real-time dashboard!
Control 256 relays! Seeing is believing!
A solar-powered temperature and humidity monitoring system for compost.
This parking sensor with Arduino is an easy project.
Fully adjustable via sketch of Arduino NANO/UNO | Easy making from ready-made components | Non-mechanical unbreakable sensors | Strong frame
Not just a Smart Coffee Maker with Smartphone control, it's a multipurpose ThermoGraph also!
Hello all, welcome to another Arduino Sensor Tutorial, in this Blog, we will learn how to wire and code MPU 6050, lets start!
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
Do you want to check from anywhere the temperature, pressure and humidity? If so, this project will show you how to do it.
Smart home system using MediaTek Linkit, Xbee, Arduino, Orange PI and Azure
Record and play back a few seconds of input stored in EEPROM.
A simple, inexpensive and super sensitive geophone
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
I found limited documentation on the usage of a color sensor I recently purchased, so here is my attempt to make it more simple.
Log your aquarium's temperature and get an SMS when it's outside a given range
This project emulates a Philips Hue Bridge that is able to control multiple types of lights.
Visualize sound frequencies spectrum with an OLED 128x32 display, Arduino Nano 33 BLE and an electret microphone amplifier (MAX9814).
A quick and easy system to monitor the Humidity and Temperature of your environment.
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
