High sensitive WiFi Fish Bite Alarm with NodeMCU ESP8266 and vibration sensor. Now you can not miss a fish bite with your smartphone!
Control your home appliances through any remote very easily.Even you can use your old remote to control home appliances.
Although NodeMCU allows us to monitor data globally, the NRF24L01 is limited to receiving data up to a 100-meter range. The NRF24L01 interfa
Capturing sensor data and logging them locally and on an IoT service, via MQTT protocol.
We show how you can easily build a battery powered Wi-Fi Door sensor and send notifications to your phone without coding and programming.
Arduino Project: How to make a Fidget Spinner RPM counter with Hall-effect sensor.
I'v been following the Polverine project which interests me a lot due to the onboard PM and VOC Gas sensors, I decided to try some examples
Motion-controlled PC spaceship game using XIAO nRF52840 Sense IMU data
Arduino 7 segment tutorial
The basic element of every vending machine is the money counter, but prices are from $100, so I have to do it myself!
We will learn how web servers like thingspeak work, then we will connect the ESP8266 to upload data to the internet and vice versa.
The Eagle library of the HX711 module (Amplifier for Loadcell sensor) was not available in Eagle.
Automated colour transmission and reflection measurement system for quantifying results of measurements with a colour change.
A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.
Place a Weather Station remotely on a mountain, radio transmitter and receiver using two LilyGO LoRa32 SX1262 equipment, network data relay.
Know what you breathe. A handy and wearable hazardous gas detection system with LED indication.
LPG leakage is monitored using arduino and MQ2 gas sensor module. the concentration of LPG particles are plotted using serial plotter.
A convenient, wearable device used in everyday life in order to keep your chances of getting COVID-19 low through cough detection.
Build a simple DIY Arduino Smoke Detector with MQ-2 Gas/ Smoke sensor
Using DHT11 sensor connected to nodeMCU to read Humidity and Temperature using Cayenne mydevices platform
Set up your Raspberry and get the first touch with an I2C sensor.
Smart Ultrasonic Distance Finder Using 3 Ultrasonic Sensors Hey geeks, welcome back to Techatronic. Are you searching for a distance finder
A contact-less temperature measurement booth using face detection and helping people what to do next if high temperature is detected.
Demonstrate an IoT application connecting Seeed Studio Grove Starter Kit for LaunchPad sensors to the Xively IoT cloud platform.
