Encrypted Tactical handheld Radio with Voice, Text and Live Image Streaming.
Turn raw SDR samples into a DJI drone's serial number, GPS position and pilot location, faster than real time at 100 Msps.
Project using Arduino Micro and CC1101 to display the tyre pressures transmitted at 433MHz by Renault tyres (based on Toyota TPMS project).
Sensitive retro look radio capable of receiving signals from middle wave and short wave band.
This project walks through how to implement a simple FIR filter with pre-generated coefficients in Verilog.
Radio that works with analog signal is implemented digitally on FPGA via VHDL.
Setup of the ZCU102 with AD9371 FMC card for SDR applications.
An 11 elements Yagi antenna with 14dB of gain for 868-915Mhz, tunable, useful for Lo.Ra., OGN, Fanet, Flarm, Meshtastic, Helium, Miner, etc.
Create a fully automated ground station that will receive/decode NOAA weather satellite images and upload them to an AWS S3 website.
Step-by-step guide to build a custom PetaLinux image for the ADRV9009 + ZCU102 after modifying the HDL reference design by Analog Devices.
This project walks through how to get started with the RTL-SDR on Mac OS 14
Combine a Raspberry Pi and an inexpensive SDR (Software-Defined Radio) dongle to create a remote spectrum monitoring device.
This project is a step by step tutorial to transmit and receive signal using ADRV9009(WPCBZ) + ZCU102 (Eval Board)
Beginner’s guide to capturing RF with ADRV9009 + ZCU102 in GNU Radio—visualize, analyze, and start your SDR journey.
The RFSoC provides high speed ADC and DACs with PL and PS in FPGA. Lets look at the basics
RTL2832 dongles were designed to receive DVB Digital Video Broadcast signals. We need to install a driver to use SDR Software Defined Radio.
DDS (Direct Digital Synthesis) Analog Devices AD9959 4-Synchronized Channels DDS Arduino Shield for Arduino MEGA 2560
The way to create a high-precision generator from 100 kHz to 600 MHz based on DDS from Analog Devices - AD9910.
Raspberry Pi development board with SDR hardware, which functions as a web server, and the radio is accessed via a web browser.
Walking through the setup of the SDR Zmod on Eclypse Z7 for SDR development using GNU Radio.
This project walks through how to create a Vitis 2021.2 hardware accelerator platform with GNU Radio Toolkit for AXU2CGB board made by Alinx
Raspberry Pi based tools on board utility vehicles to live stream drive-by meter readings and GPS locations to Google Cloud.
A custom-built car radio for my Jeep using Raspberry Pi, RTL-SDR, CAN bus integration, GPS, VFD display, and good old-fashioned knobs.
Detailed instruction manual；AM FM two mode；Easy to build; High quality speaker; Hope you like it.
