A 4 wheeled bot which can be trained to autonomously survey a known environment or can be controlled via a laptop or a phone!
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
Converting a rover to use the Arduino 101 including the Bluetooth Low Energy (BLE) radio and 6-axis Inertial Measurement Unit (IMU).
Roger Bot can be custom programmed, in addition to its built-in Bluetooth program for its robotic arm and rover capabilities.
Clean your yard from your smartphone or preset a job for AYSE to follow!
A rover that runs on wheels using Arduino controlled remotely through our voice command alone! (With the use of BitVoicer.)
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
Build a weatherproof outdoor rover for less than $500 with a Raspberry Pi and Viam.
The Rover project used Azure
A rover-robot that detects your face and follows you.
The Great Mojave Rover Project is an autonomous rover built to survive the extreme conditions of the Mojave Desert. [Work in Progress]
Build an Arduino powered robot or car that can be remotely controlled over the web using the EMQX MQTT broker.
A rover project with blinking LEDs.
An Arduino-based rover that is capable of sensing its environment and navigating without human input.
I'm incrementally re-purposing the AWS DeepRacer for general purpose mobile robotics tasks including parallel-parking and lane-following.
A simple rover for line following made exploiting the ARTe Arduino REal-Time eXtension.
Makibot is a ROS development Robot for SBC like Beaglebone, Jetson Nano and Raspberry Pi.
Ichigo is an agricultural robot that goes around the cultvational land and gets you statistics about the diseased plants and the field.
watchX is a smartwatch that anyone can make, code, play games and build a rover robot.
Robotic system for environmental analysis.
Application notes for Pmod DHB1 and Arduino Uno. In this app, motor control is carried out using the serial monitor.
This tutorial teaches you how to build a rover that can be driven (with a live video feed) using your mobile phone.
So the goal is simple, to create a rover that wouldn’t fall off an edge nor would it hit an obstacle. And do it all in Zephyr RTOS.
Finally SunFounder has moved away from the acrylic pieces and moved to stamped metal assemblies. Ezblock Studio has matured!
