Sending documents for your-coworker by putting it on a car, and draw a path from you to your co-worker on web-based map.
This project demonstrates how to implement a custom PL design on the KR260 utilizing its RPi & PMOD connectors.
Exploring Hand-Controlled Tele-Operation of a Robotic Arm on the Tria Vision AI-KIT 6490
This is game based of offline dinosaur game using 16x2 LCD and Arduino UNO.
Version 1 of a friendly, wearable robot based on a fennec fox. Work in progress for Virtual Maker Faire :)
I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.
The aim of this tutorial is to use the ROS Noetic on a Raspberry Pi to test the performance of the low‐cost RPLiDAR A1M8 by Slamtec.
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Multiple servos control, using Python and a PAN/TILT mechanism construction to PiCam positioning.
One of the challenges is to get the robot to go in a straight line. Use the GY-521 module (MPU-6050 Board) to make a 2WD robotcar drive.
An air hockey robot that's running on Windows 10 IoT Core.
A Simple RGB LED light on Arduino UNO with Fade.
Track the sun in X and Y with this simple Arduino project.
Give your mBot a LIDAR measurement hat using the MappyDot to avoid your cat, legs and furniture.
Control your roomba from anywhere.
A PID controlled line follower robot, named Elliot.
For all of the advanced software and multitude of sensors why is it that this expensive little robot still gets stuck under beds?
UAV for continuously monitoring the aquaculture behaviors such as water quality, temperature, pressure, pH value, etc.
In this project capacitive touch sensing is used to actuate the 3D-printed hand.
In this project, I built an obstacle avoiding robot using an ultrasonic sensor and an Arduino microcontroller.
Avnet provides pre-verified designs for its platforms. This project describes how to re-generate the ZUBoard designs from source.
I decided to make my own phone that would only be used for making and receiving calls. I hope it will be as durable as the Nokia 3310.
This project walks through how to build a custom hardware design for the Kria KR260 Robotics Starter Kit in Vivado 2022.1
Looking at the different micros from STM and comparing them to each other along with an Arduino UNO, converting an STM32 board to an Arduino
