Get the current Date and Time automatically from the mobile network, using an Arduino Uno, the SIM900 GSM Shield, an LCD display.
This project describes how to build a GPS data logger at a lower cost.
Discover how to set up and run YOLOv12 on Jetson Nano 4GB for real-time object detection. Efficient, powerful AI at the edge!
Using NTP (Network Time Protocol), is a protocol that is widely used for synchronizing the clocks of computers over a network.
Embedded systems development of an Formula SAE Electric Racecar at the University of California, Irvine.
This project aims to make a system that can effectively track celestial bodies (such as planets ) with a fair amount of accuracy.
I made a realtime Arduino clock with a small LCD display.
A 3D printed clock made up of lots of LEDs (LOL).
Invisible intelligence unleashed for an invisible threat: Deploy the MAX32620FTHR with LoRa, PubNub, and more for IoT radiation sensing!
Running the HC-SR04 ultrasonic sensor on Zephyr RTOS.
Modified the DIY split-flip display radio clock from a Japanese magazine into a true web clock.
An open-source, C++ coded, synchronous tonewheel organ synthesizer for the STM32F4 Discovery Board.
LOccam is a light implementation of OCCAM intended for Arduino. It is ideally suited for multitasking, especially for beginners.
In this tutorial we will learn how to get the date and time from NIST TIME server using ESP8266 OLED and Visuino,
In this tutorial we will learn how to program ESP32 M5Stack StickC to Display a time on the LCD and also set the time using StickC buttons.
Wanna sound like a chipmonk, or just want to sing in tune? Then this may be the perfect project for you
First calculator circuit that works even when time is reversed.
Easy project to stream temperature, humidity and pressure data from from Bosch BME280, via a Raspberry Pi for analytics in SA Studio
Let’s send data to The Things Network using a BMP280 sensor and our BastWAN board.
Make direct contact with satellites and communicate the time, position respected data. Decoded in terms of latitude and longitude.
Monitors the health of its user from a bracelet that sends information to a dashboard.
Your Android phone is full of sensors. This tutorial aims to share some creative ideas on how to analyse the generated data.
I built an open-source, modular ESP32-based bus tracker that lets users track buses using GTFS data, using a 3D and spare components I had.
