In this tutorial we will make a Gear Shift Indicator using GC9A01 SPI Display, Arduino and Visuino program. Watch the Video!
Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!
A 'spin' on neopixel lights
Discover an educational module to easily learn and experiment with AC motors using the StamPLC from M5Stack.
Drive a 28BYJ-48 stepper motor precisely with an STM32 and ULN2003 driver, using GPIO for coil control and buttons for direction.
I added wireless single-axis joystick control to a BaseCam gimbal control board using 2 x ESP32-S3 dev boards over Bluetooth Low Energy!
In this tutorial we are going to control a stepper motor Nema 17 by using a 3rd Party EDP stepper component in Visuino.
Controlling Schneider VFD using Modbus RTU by RS485 Hexabitz module "H1DR1".
This project shows how to create incremental encoder from an HDD motor using GreenPAK™ IC
I needed a way to print a lot small parts (cable chain pieces) fast and preferably in an automated way, so I build this modular delta belt 3
Art play a very major role in education. In this activity using some basic electronics and crafting learn to draw the perfect circle.
Raspberry Pi PICO with A4988 Stepper Motor Driver Setup
The H-Bridge is a foundational topology when it comes to reversing a motor. Countless applications use it, such as electric cars and amps.
Feetech's STS3215 servos have a wide range of functionality beyond traditional hobby servos, but setting them up can be tricky.
Watch your step! Because in this Protip we ascend with motor control into the domain of stepper motors.
Did you ever want something too fascinating and then realized it was a bit more than fascinating, i.e. it was super excellent?
For now, you can control Servo with Blynk.
🔰What is MOSFET Driver? A MOSFET driver is an electronic circuit or component that provides the necessary voltage, current...
This machine, built around a MSP430G2ET, uses a DC motor to deal out a card when motion is detected within 4 inches of an ultrasonic sensor.
This is a DC Motor Driver that is controlled via I2C. The I2C Address can be set in the range: 1 to 127. It can read a Quadratic encoder.
I created a DIY controller box using single-axis joystick modules and Arduino Nano to control an RGB LED, servo motor, and stepper motor!
In this tutorial we will learn how to control a PWM Signal Generator Module XY-LPWM with Visuino. Watch the Video!
The temperature will be monitored with an LED, and the regulation will be done with a fan which will be turned on at a certain temperature.
A calculator found in the garbage became the foundation for an intriguing art installation inspired by the Olivetti Programma 101 conspiracy
