Non-Inverting Logic-Level-Shifting Heavy Load Control Unit. 3.3V to 12V, using 2 LEDs for opto-coupling. (For updates scroll to the end)
In this tutorial we will use Servo Motor and ATOM Matrix ESP32, and Visuino to control servo motor degree position. Watch the video!
In this tutorial we are going to control a stepper motor Nema 17 by using a Custom Code component in Visuino Pro.
I built a Hybrid Delta Robot using Arduino & Servo motors. Delta robots are widely used in factories for high-speed pick and place operation
In this Project we will learn how easy it is to control a Linear Actuator with Arduino using a Capacitive touch button and Visuino.
A Rock-Paper-Scissors game where a human wearing a sensor-equipped glove plays against a mechanical robot hand.
A high torque laboratory style shaker based on a Microwave motor. Cheap and easy to build. Great for etching your own PCBs.
In this tutorial we will learn how to control a stepper motor, by setting steps and direction using a Keypad and Arduino.
Raspberry PI driven car with onboard Tensorflow used to recognize pictures in real time
At first, I wanted to buy a shooting turntable, but I found that there happened to be two idle geared motors.
I decided to upgrade my camera slider with an Arduino-controlled stepper motor, while also making the slider portable using NPF batteries.
This balancing "Segbot" receives commands wirelessly over Bluetooth that are interpreted as steering instructions (UIUC SE 423)
I believe that most of boys are desired to own a RC car and explore anywhere they want. Me too! So I thought of making one with my BeagleBon
In this article, we will explore how to create a simple dual flip-flop circuit using the 74F74D.
You'll learn how to create a circuit to control anyone mobile robot with wheels.
Controlling Servo Motors with XMC µControllers is nothing new. But this time we get to use the Servo Library!
This is a wind tunnel that I have made to test how aerodynamic objects are and how the air behaves around them.
How to Control the UIM344 Series Closed-Loop Pulse-Direction Motor Using an Arduino
I'm setting out to build the e-bike of kayaking using machine learning on the edge.
"Whosoever balances this hammer, if they be worthy, shall possess the power of Thor... "
This tutorial will teach you to Control a Motor with a Magicbit using Magicblocks.
Mercury is an ESP8266 based development board. This tutorial explains how to setup Mercury board on Arduino IDE
Motor Driver powered by a Raspberry Pi Pico, uses a Mosfet as switch setup to run motor.
A robot car that can swing up and balance on its front wheels, while launching a catapult at the same time.
