6.4A-2uA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Make a Height Measuring tool using a VL53L0X.Time-of-Flight ranging sensor Watch the video!
A simple circuit to monitor AC power, Breakout board can be plugged anywhere and show voltage, current and power.
This walk-through will install linux-gpib, python-vxi11-server and tcpip2instr on a Raspberry Pi with gpib4pi shield.
In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.
Check your plants soil moisture with this simple tester. You will know if you need to water your plants.
Implement a 4-channel TDC on Cmod A7 35 using MicroBlaze and SRAM with 30ps rms and measurement rate of 60MSa/s
This guide describes how to measure, export and visualize sensor data on an Android device using IoTool. Valid for many different sensors.
Currently object measurements are carried out in many ways such as laser, ultrasonic, etc. I will try with an ordinary webcam to measure obj
How to improve on the stripboard oscilloscope we built in the last article.
Ever wish you could use BNC cables or probes with the XMEGA Xprotolab?
A device to measure the height of walls/buildings with high school trigonometry: sensing angle with a 3D magnetic sensor, dot laser & level.
MAKERFACTORY ESP32 Evaluation board provides both powerful ESP32 and many useful IO. Measure Temp by DS18B20 & show on OLED display.
This project consists of making a logical analyzer, which can help us analyze digital hardware and software analysis.
This project walks through basic RF test measurements using the Zmod Digitizer with WaveForms from Digilent.
This project walks through how to design analog filters with RC circuits and measure their frequency response in WaveForms.
Our IoT project utilizes ultrasonic sensor technology to create a modern-day measuring tape.
A four-channel temperature datalogger for PT1000 probes measured by Atmega32U4 and logged on SD-card.
In this tutorial we will use Arduino UNO, OLED Lcd, MQ-3 Alcohol Gas Sensor module, and Visuino to display Alcohol levels on the display.
This project walks through how the Eclypse Z7 is used with WaveForms to verify the electrical functionality of my mini Helmholtz coils.
Providing office owners and users with information about comfortability of their workplace.
This was the first kit I had ever put together, a capacitance meter it can read up to 500uf. I did all the soldering, my first project!
Using LINX toolkit in Labview
The application is used to detect and store the signals from a MeC (Microbial Electrolysis Cell for hydrogen production)
